Microwave energy was used to cure polymer coatings on instrument-grade wood. A processing method was developed that included spray coating the polymer onto raw wood panels and pulling the coated panels through a 2.45GHz multi-mode microwave cavity by means of a low-power motor. Materials characterization and testing used to analyze the feasibility of using microwave processing as a coating meth...

The aim of this work was to develop a pulsatile release system with metoprolol for chronotherapeutical use by coating swellable mini-tablets with Eudragit RS. To study the influence of the formulation factors (amount of coating polymer, plasticizer percentage in film coating and swelling agent percentage in mini-tablets), a Box-Behnken design of experiment (DoE) was used. To evaluate the influe...

Drug-eluting stents (DES) are commonly used in coronary angioplasty procedures. A DES elutes drug compounds from a thin polymeric coating into the surrounding coronary artery tissue to reduce in-stent restenosis (a significant lumen loss due to growth of vascular tissue). Biodurable (non-erodible) polymers are often used in the current DES coatings, which stay permanently in the patients. While...

This article presents an investigation of antiadhesive coatings for nanoimprinting lithography. To get the optimum parameters of the coating process, a surface-contact angle goniometer and an atomic force microscope were used for detailed comparison of the coated surfaces produced with different process parameters. With the antiadhesive coating, the contact angle of deionized water on the mold ...

Spin-coating one polymer solution on another spin-cast polymer film is believed to result in unfavorable interfacial mixing. Here, we show some results to demonstrate that some interesting properties will be obtained in such mixed bilayer films formed by sequential spin-coating. Poly(9-vinylcarbazole) and poly(9,9-dioctylfluorene-2,7-diyl) were chosen as the first and second polymer layers, res...

Coating or encapsulation of nanoparticles is a major challenge due to the extremely small size, high surface energy, and high surface area of the nanoparticles. In this paper we describe a new method using supercritical CO2 as an anti-solvent (SAS) for nanoparticle coating/encapsulation. A model system, using silica nanoparticles as host particles and Eudragit polymer as the coating material, w...

Transition metal ferrites such as CoFe2O4, possessing a large magnetostriction coefficient and high Curie temperature (Tc > 600 K), are excellent candidates for creating magnetic order at the nanoscale and provide a pathway to the fabrication of uniform particle-matrix films with optimized potential for magnetoelectric coupling. Here, a series of 0-3 type nanocomposite thin films composed of fe...

The functional success of a biomedical implant critically depends on its stable bonding with the host tissue. Aseptic implant loosening accounts for more than half of all joint replacement failures. Various materials, including metals and plastic, confer mechanical integrity to the device, but often these materials are not suitable for direct integration with the host tissue, which leads to imp...

A commercially available poly(vinyl butyral) (PVB) coating was modified using a combination of 1–10wt.% bis(trimethoxysilylethyl)benzene and dibutyltin dilaurate as the hydrolysis catalyst. Results of attenuated total reflectance (ATR)–FTIR analysis indicated the modification resulted in a hybrid coating material containing silicate moieties covalently bonded to the PVB polymer chains. Gravimet...