Polymer nanocomposites are known to exhibit enhanced mechanical properties compared to neat polymeric system [1]. Fillers can be used as reinforcement in polymer composites for the enhancement of mechanical properties [2]. Reinforced” polymers consist of a polymeric matrix and relatively stiff filler that exhibit a drastic change in modulus or stress at given strain in compare with the pure pol...

Polymer nanocomposites are known to exhibit enhanced mechanical properties compared to neat polymeric system [1]. Fillers can be used as reinforcement in polymer composites for the enhancement of mechanical properties [2]. Reinforced” polymers consist of a polymeric matrix and relatively stiff filler that exhibit a drastic change in modulus or stress at given strain in compare with the pure pol...

Composites of lead zirconate titanate particles in an epoxy matrix are prepared in the form of 0-3 and quasi 1-3 with different ceramic volume contents from 10% to 50%. Two different processing routes are tested. Firstly a conventional dielectrophoretic structuring is used to induce a chain-like particle configuration, followed by curing the matrix and poling at a high temperature and under a h...

A series of observations of polymer sheathing in multiwalled carbon nanotube (MWCNT)−polycarbonate composites are presented. This sheathing was observed in images of the composite fracture surface and is consistent with diameter distributions of the as-received and embedded MWCNTs. A novel nanomanipulation experiment, where the sheathing balls up when contacted by an AFM tip, confirms this phen...

In this paper, a new cohesive interface model is applied to characterize carbon nanotube (CNT) composites using the boundary element method (BEM). In the previous BEM models of CNT composites, a rigid-inclusion model was employed to represent the CNTs in a polymer matrix due to their extremely high stiffness as compared with the polymer. Perfect bonding interface conditions between the CNT fibe...

Graphene/polyvinylidene fluoride (PVDF) composites were prepared using in-situ solvothermal reduction of graphene oxide in the PVDF solution. The electrical conductivity of the composites was greatly improved by doping with graphene sheets. The percolation threshold of such composite was determined to be 0.31 vol.%, being much smaller than that of the composites prepared via blending reduced gr...

Natural fibers have been used to reinforce materials for many years. More currently they have been employed in combination with plastics. Many types of natural fibers have been investigated for use in plastics including flax, hemp, jute, cotton and banana. Natural fibers have the advantage that they are renewable resources and have marketing appeal. These agricultural wastes can be used to prep...

Using the cutting of long fibre reinforced polymer and ceramic particle reinforced aluminium as the examples, this paper tends to understand some common features in the mechanics modelling of machining composites. It demonstrates that an accurate characterisation of matrix deformation, matrix–reinforcement interaction, and reinforcement deformation are key factors for the establishment of amode...

Graphene is one of the stiffest known materials, with a Young's modulus of 1 TPa, making it an ideal candidate for use as a reinforcement in high-performance composites. However, being a one-atom thick crystalline material, graphene poses several fundamental questions: (1) can decades of research on carbon-based composites be applied to such an ultimately-thin crystalline material? (2) is conti...

One of the most important physical factors related to the thermal conductivity of composites filled with graphene nanoplatelets (GNPs) is the dimensions of the GNPs, that is, their lateral size and thickness. In this study, we reveal the relationship between the thermal conductivity of polymer composites and the realistic size of GNP fillers within the polymer composites (measured using three-d...