This paper investigates the effect of water vapour in CO sensing by using Pd doped SnO2 sensors realized in thick film technology as an example of the basic understanding of sensing mechanisms applied to sensors. The results of phenomenological and spectroscopic measurement techniques, all of them obtained under working conditions for sensors, were combined with modelling in order to derive con...

Polymeric composite films with a high loading of nano-size silicates can hardly meet the increasingly stringent fireproof and smoke-free requirements during burning. Thus, it is desirable to prepare pure clay films that can block air, heat, and flame. Here we report an organic-free clay film capable of both flame- and heat-shielding. The film was prepared from the self-assembly of nanometer-thi...

We design silicon membranes with nanohole structures with optimized complex unit cells that maximize broadband absorption. We fabricate the optimized design and measure the optical absorption. We demonstrate an experimental broadband absorption about 3.5 times higher than an equally-thick thin film.

A three-electrode based CO(2) sensor was fabricated using thick-film technology. The performance of this sensor was further enhanced by incorporating platinum nanoparticles onto the working electrode surface. An eight-fold increase in the signal output was obtained from the electrode with the platinum nanoparticles. The sensing output was linearly related to the CO(2) presented. Stability measu...

The flux penetration near a semicircular indentation at the edge of a thin superconducting strip placed in a transverse magnetic field is investigated. The flux front distortion due to the indentation is calculated numerically by solving the Maxwell equations with a highly nonlinear E j law. We find that the excess penetration can be significantly 50% larger than the indentation radius r0, in c...

Nanofabrication technology plays an important role in the performance of surface plasmonic devices such as extraordinary optical transmission (EOT) sensor. In this work, a double liftoff process was developed to fabricate a series of nanohole arrays of a hole diameter between 150 and 235 nm and a period of 500 nm in a 100-nm-thick gold film on a silica substrate. To improve the surface quality ...

This paper describes a method of thin film and MEMS processing which uses self-assembled monolayers as ultra-thin organic surface coating to enable a simple removal of microfabricated devices off the surface without wet chemical etching. A 1.5-nm thick self-assembled monolayer of dodecyltrichlorosilane reduces the adhesion between the SiO substrate surface 2 and a 100-nm thick evaporated alumin...

Novel method doped carbon with nanoparticle Cr2O3 and thin film has been studied in much thought in wavelength range, the doping can help new excellent physical and chemical properties for carbon, this application has a semiconductor feature. Nanocomposite thin film deposited on copper and glass substrates have been created by utilizing Spray Pyrolysis method. The prec...

The development of thin film-based structures/devices often requires thin films to be transferred onto arbitrary substrates/surfaces. Controllable and non-destructive transfer method, although highly desired, remains quite challenging. Here we report a general method for fabrication and transfer of hybrid (ultra)thin films. The proposed solution-based in-situ transfer method shows not only its ...