a r t i c l e i n f o Solution-based chalcogenide glass films, traditionally deposited by spin-coating, are attractive for their potential use in chip-based devices operating in the mid-infrared and for ease of nanostructure incorporation. To overcome limitations of spin-coating such as excessive material waste and difficulty for scale-up, this paper introduces electrospray as a film deposition...

Following the successful application of Electron Beam (EB) Physical Vapour Deposition (PVD) Thermal Barrier Coatings (TBCs) to moving parts of turbine engines the erosion resistance of these coatings has been of interest among researchers. However, although there are a number of papers on the erosion rate of these coatings, little has been reported on their erosion mechanism. This paper provide...

Glassy deposits mainly comprising of calcium–magnesium–alumina–silicate (CMAS) accelerate the spallation thermal barrier coatings (TBCs). In this work, an Al2O3 layer was produced on yttria-stabilized zirconia (YSZ) coating by plasma spray–physical vapor deposition (PS–PVD). The effects processing parameters during PS–PVD process microstructures deposited were investigated. A homogeneous with p...

Residual stresses play an essential role in determining the failure mechanisms and life of electron beam-physical vapour deposition thermal barrier coating (EB-PVD TBC) system. In this paper, a new transitional roughness model was proposed applied to describe interfacial profile during cycles. Finite element models were implemented calculate residual at specific positions close interface TBCs u...

AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...

This paper develops a simple and versatile analytical method for characterizing residual stress associated with the deposition of thick, thin, single multilayer coatings. study is great importance, since generation can lead to formation significant defects in coating. To illustrate effectiveness our method, two different processes were characterized. The coatings formed are intended anti-corros...

The production of barrier packaging materials, e.g., for food, by physical vapor deposition (PVD) of inorganic coatings such as aluminum on polymer substrates is an established and well understood functionalization technique today. In order to achieve a sufficient barrier against gases, a coating thickness of approximately 40 nm aluminum is necessary. This review provides a holistic overview of...

Diagnosing a posterior vitreous detachment (PVD) is important for predicting the prognosis and determining the indication for vitreoretinal surgery in many vitreoretinal diseases. This article presents both classifications of a PVD by slit-lamp biomicroscopy and of a shallow PVD by optical coherence tomography (OCT). By biomicroscopy, the vitreous condition is determined based on the presence o...