background: high level radiation areas have been recognized on various parts of the earth. mahallat hot spring region is one of these areas. study of exposure in these areas can be helpful in investigating the effects of ionizing radiation. internal and external exposure to the staff was studied. materials and methods: used materials and instruments include: rss-112 ionizing chamber for environ...

PURPOSE The MOSkin is a MOSFET detector designed especially for skin dose measurements. This detector has been characterized for various factors affecting its response for megavoltage photon beams and has been used for patient dose measurements during radiotherapy procedures. However, the characteristics of this detector in kilovoltage photon beams and low dose ranges have not been studied. The...

A fibre detector with multianode PM readout for high rate applications was developed for the HERA-B spectometer to cover the area near the beampipe. Such a detector has to operate at particle rates up to 2 ⋆ 10 mms and has to tolerate a radiation dosis up to 1 Mrad/y. The light output of test detectors with different scintillating fibres was measured as well as the light transport through clear...

Multi-detector computed tomography is now an established modality for the investigation of coronary artery disease.1,2^ 64-Slice multi-detector computed tomography is the standard requirement by the British society of cardiac imaging and can image the whole heart in four heart beats. The 320 slice multi-detector computed tomography can image the heart in one heart beat, but both technologies de...

We examine the application of Josephson radiation emitters to spectral calibration of singlephoton-resolving detectors. Josephson junctions were patterned in a YBCO film on a bi-crystal sapphire substrate and were voltage controlled to generate radiation in the frequency range of 0.051 THz. The detector used in this work consisted of a gate-defined quantum dot photon-to-charge transducer couple...

The upgrade of the ATLAS experiment for the High Luminosity LHC (HL-LHC) will include a new pixel detector. A completely new detector control system (DCS) for this pixel detector will be required in order to cope with the substantial increase in radiation at the HL-LHC. The DCS has to have a very high reliability and all components installed within the detector volume have to be radiationhard. ...

We examine the application of Josephson radiation emitters to spectral calibration of single-photonresolving detectors. Josephson junctions are patterned in a YBCO film on a bicrystal sapphire substrate and are voltage controlled to generate radiation in the frequency range of 0.05–1 THz. The detector used in this work consists of a gate-defined quantum-dot photon-to-charge transducer coupled t...

As one of the key components in the CBM experiment, the Transition Radiation Detector (TRD) will play a significant role in the particle identification. A fast detector with double sided readout chambers[1] and a ALICE type of detector with both drift and amplification regions have been designed for the circumstance of high particle rates. We propose to build a fast detector with an amplificati...