A brief summary of simulation techniques for recrystallization is given. The limitations of the Potts model and the Cellular Automaton model as used in their standard forms for grain growth and recrystallization are noted. A new approach based on a hybrid of the Potts model (MC) and the Cellular Automaton (CA) model is proposed in order to obtain the desired limiting behavior for both curvature...

the hot compression tests were carried on x45crniw189 valve steel (x45) in the temperature rangeof 1000– 1200 °c and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperaturesoftening behavior of this steel. for the exact prediction of flow stress, the effective stress-effectivestrain curves were obtained from experiments under various conditions. on the basis of experimen...

A secondary recrystallization Lab study focusing on the secondary recrystallization temperature and magnetic properties was carried out on cold rolling industrial samples of 3%Si grain-oriented electrical steel produced by low slab reheating temperature technology. The results showed a secondary recrystallization temperature, determined by the observed grain size change, of 1080 C with annealin...

In this paper, how structure-sensitive parameters derived from the hysteresis loop, like coercive field, remanent induction, and hysteresis losses, can be used to characterise recovery and recrystallization in cold rolled Ti-Nb stabilised interstitial free ultra low carbon steel is shown. The effect on hysteresis measurements of isothermal annealing treatments applied to industrially cold rolle...

We have used medium energy ion scattering, temperature programmed desorption, and atomic force microscopy to study the interface composition and thermal stability of epitaxial strontium titanate thin films grown by molecular-beam epitaxy on Si 001 . The composition of the interface between the film and the substrate was found to be very sensitive to the recrystallization temperature used during...

Sucrose recrystallization and the release of moisture that occurs as molecules of sugar are incorporated into a growing crystal lattice have been hypothesized as the cause of firming in soft cookies over time. Raffinose, a trisaccharide and known sucrose crystallization inhibitor, was tested as a means to inhibit or slow this process. Texture changes in the cookies were quantified using peak fo...

Secondary recrystallization id grain-oriented silicon steel is studied by the high-temperature background damping. Abnormal grain growth involves an abrupt drop of the background. The temperatures of initiation and completion of the secondary recrystallization are, thus, determined for the sane sample from the definite change in background with increasing temperature. The background measured on...

In this paper, the traceability of copper from the anode to the cathode and then the wire rod has been studied in terms of impurity content, microstructure, texture, recrystallization kinetics, and ductility. These characterizations were obtained based on secondary ion mass spectrometry, differential scanning calorimetry (DSC), X-ray diffraction, HV hardness, and electron backscattered diffract...

Top-down approach has been viewed as an efficient and straightforward method to prepare nanosized zeolites. Yet, the mechanical breaking of zeolite causes amorphization, which usually requires a post-milling recrystallization to obtain fully crystalline nanoparticles. Herein we present a facile methodology to prepare zeolite nanocrystals, where milling and recrystallization can be performed in ...

Recrystallization of [PdCl2([9]aneS2O)] ([9]aneS2O = 1-oxa-4,7-dithiacyclononane), 1, and [PtCl2([9]aneS2O)], 2, by diffusion of Et2O vapor into solutions of the complexes in MeNO2 yielded three phases of 1 and two phases of 2. The known phase of 1, herein designated α-1, was obtained under ambient conditions. A second phase, designated β-1, was initially also obtained by this method; however, ...