Refrigeration oil and other materials used with refrigerant for refrigerators or air conditioners should have thermal and chemical stability to maintain the system reliability. Some kinds of synthetic oil are used for alternative refrigerant, HFC’s and hydrolysis, material compatibility, and low-temperature extraction of contaminant or sludge are important subjects. Much more numbers and times ...

More than one year has passed since refrigerant for refrigerator was changed from CFC12 to HFC134a. Long term reliability of refrigerator in HFC134a refrigerant system is mainly dependent on lubrication of moving parts of compressor and clogging of capillary tube. To maintain better practical reliability in components in compressor such as refrigeration lubricant,metallic materials and motor in...

Fin-tube heat exchangers are widely used in air-conditioners and heat pumps, which are constructed with a lot of tubes. Refrigerant circuit of heat exchanger with numerous pipe can be constructed by many methods. Refrigerant circuit design is usually determined designer’s experience and case by case test without guides. The number of path affects largely on heat exchanger performance. In this p...

CFD was applied to evaluate the performance of both existing and improved designs for refrigerant distributors. In general, it is better to utilize a spherical base as compared with other shapes and to locate the orifice close to distributor base. These changes tend to improve the robustness of the distributor in terms of providing even flow and phase distribution in different outlet branches w...

refrigerants that are used in refrigeration systems, cause environmental difficulties such as depletion of ozone layer and greenhouse effect. thus, we must find substitutes for such refrigerants, in this paper, the effect of refrigerant on the thermodynamics performance of refrigeration cycles are studied. to do this, a refrigerator that has designed for r12, is simulated. results show that pur...

Knowledge of the solubility characteristics of an oiVrefrigerant mixture is important when analyzing the lubrication system behavior in refrigerant compressors since the solubility significantly affects the viscosity of the mixture. For an operating compressor, the lubricant is a mixture of oil and refrigerant and the viscosity of the mixture is a strong function of the refrigerant concentratio...

There is no single perfect refrigerant for diverse air conditioning, refrigeration, and industrial applications. The predominant halocarbons (CFCs, HCFCs, and HFCs) combine excellent efficiency and safety with acceptable costs. However, they contribute to ozone depletion potential (ODP) and/or global warming potential (GWP). The Montreal Protocol has eliminated ODP by requiring replacement of C...

Mathematical models have been popularly applied to study the compression processes of superheated refrigerant vapor in compressors. As to the case when refrigerant enters a compressor cylinder in the state of liquid and vapor mixture, however, the availability of fundamental studies is very limited. -A mathematical model is presented to simulate the compression processes of two-phase saturated ...

Heat transfer coefficient data was taken during in-tube evaporation of five differenct refrigerant mixtures. These measurements were performed in a 318" O.D. (9.7 mm) smooth copper tube at refrigerant temperatures of -zoe and 4°C. Four different mass fluxes ranging from 125 to 375 kg/s-m2 were tested. On a mass basis, the five different mixtures tested were: R-125 (40%) I R-32 (60%), R-32 (30%)...

This study proposes a procedure for a risk analysis for leakages of flammable refrigerants into a poorly ventilated three-dimensional space. It also presents several test cases of risk analyses on flammability and ignitions to a leaked refrigerant. Concentration of a leaked flammable refrigerant at a leakage window, Cin, is determined by mass balance, providing information on the capacity of an...