The chloride corrosion of reinforcing steel in reinforced concrete (RC) structures is a significant reason for premature deterioration and failure of RC structures in aggressive environments such as Persian Gulf region. This is one of the most important sources of engineering and economic problems in developed countries. So, the repair and maintenance of RC structures exposed to corrosive envir...

This paper presents the results of an experimental campaign performed at the Laboratory of Materials and Structural Testing of the University of Salerno (Italy) in order to investigate the seismic performance of reinforced concrete (RC) beam-column joints strengthened with steel reinforced polymer (SRP) systems. With the aim to represent typical façade frames’ beam-column subassemblies found in...

A numerical method to identify thermal conductivity from time history of one-dimensional temperature variations in thermal unsteady-state is proposed. The numerical method considers the change of specific heat and thermal conductivity with respect to temperature. Fire test of reinforced concrete (RC) columns was conducted using a standard fire to obtain time history of temperature variations in...

an experimental study is conducted on three ½ scales, single-story, single-bay, frame specimens. the first specimen was a reinforced concrete frame with solid-brick infill. the second specimen was a reinforced concrete frame with hollow clay perforated-brick infill. the last specimen was a reinforced concrete frame without any infill. these three specimens were tested by pseudostatic method. di...

concrete beams reinforced with glass fiber reinforced polymer (gfrp) bars exhibit large deflections and crack widths as compared with steel reinforced concrete beams due to the low modulus of elasticity of gfrp bars. different studies show that aci 318 equation for the effective moment of inertia ie does not predict deflection well for frp reinforced concrete beams. the purpose of this paper is...

The majority of columns are subjected to a combination of an axial load and a bending moment in one or two directions. With a few exceptions, most of the research in the area of FRP wrapped columns have concentrated on the behaviour of concentrically loaded columns. This paper presents results of testing nine reinforced high strength concrete columns. The column specimens are circular in shape ...

Seismic pressures on a reinforced concrete moment-resisting structure are known to create critical and essential regions at the beam-column joints. Beam-column junctions microcosm of whole structure, therefore brittle behavior these points predicts action. Ductile joints ductile Under influence seismic forces, between RC beams columns exposed high shear stresses. Learn more about performance fi...

Corrosion of steel is one of the most important potential dangers and threats in concrete structures. Corrosion of steel embedded in reinforced concrete plays a key role in reducing the strength and durability of reinforced concrete. Several studies have proposed that alternative approaches to enhancing the performance of reinforced concrete and its resistance to corrosion. In this study, the r...

Strong vertical ground motions can significantly alter axial forces in a bridge column. Axial force variations also affect the concrete contribution to the shear capacity of a reinforced concrete (RC) member. However, the effect of axial force demands on shear capacity is a fairly complex issue since the shear demand in an RC bridge column is affected by variations in the axial force. A combine...