This paper presents first a valid, fully non-linear 2-D numerical model that can capture realistically the in-plane hysteretic behaviour of reinforced concrete (R/C) frames with masonry infills when they are subjected to combined vertical and cyclic horizontal loads in order to predict their post-elastic earthquake bahaviour. The effectiveness of this simulation was validated by comparing the n...

To assess the performance criteria of the reinforced-concrete, five-storey residential buildings common in Iran, an experimental study in the structural laboratory of the University of Tehran has been conducted. The test program includes cyclic and monotonic load tests of six beams that represent three-to-five storey buildings with rigid frame structures. Using definitions given in FEMA-356 a...

The present study evaluates the utilization of shotcrete sandwich panel (SSP) infill and CFRP strips to strengthen reinforced concrete (RC) frames. To this end, a diagonal strip-infilled RC frame, an SSP-infilled control specimen (a bare frame) were examined as single-story specimens in terms in-plane seismic response. This work compared stiffness degradation, damping, cyclic lateral Also, avai...

setback in elevation of a structure is a special irregularity with considerable effect on its seismic performance. this paper addresses multistory reinforced concrete (rc) frame buildings, regular and irregular in elevation. several multistory reinforced concrete moment resisting frames (rcmrfs) with different types of setbacks, as well as the regular frames in elevation, are designed according...

To assess the performance criteria of the reinforced-concrete, five-storey residential buildings common in Iran, an &#10experimental study in the structural laboratory of the University of Tehran has been conducted. The test program includes cyclic and monotonic load tests of six beams that represent three-to-five storey buildings with rigid frame structures. Using definitions given in FEMA-356...

Infilled frame structures are commonly used in buildings. Masonry infilled RC frames are the most common type of structures used for multi-storeyed constructions in the developing countries, even in those which are located in seismically active regions also. Masonry infill walls are mainly used to increase initial stiffness and strength of reinforced concrete (RC) frame buildings. In the presen...

concrete beams reinforced with glass fiber reinforced polymer (gfrp) bars exhibit large deflections and crack widths as compared with steel reinforced concrete beams due to the low modulus of elasticity of gfrp bars. different studies show that aci 318 equation for the effective moment of inertia ie does not predict deflection well for frp reinforced concrete beams. the purpose of this paper is...

This paper proposes a framework for the constitutive model based on the semi-micromechanical aspects of plasticity, including damage progress for simulating behavior of concrete under multiaxial loading. This model is aimed to be used in plastic and fracture analysis of both regular and reinforced concrete structures, for the framework of sample plane crack approach. This model uses multilamina...

High tall buildings are more susceptible to dynamic excitations such as wind and seismic excitations. In this paper, design procedure and some current applications of tuned mass damper (TMD) were studied. TMD was proposed to study response of 20 storey height building to seismic excitations using time history analysis with and without the TMD. The study indicates that the response of structur...

an experimental program was conducted to determine the effects of geosynthetic reinforcement on mitigating reflection cracking in asphalt overlays. the objectives of this study were to asses the effects of geosynthetics inclusion and its placement location on the accumulation of permanent deformation. to simulate an asphalt pavement overlaid on top of a crack in a concrete or asphalt pavement, ...