active filters have proven to be more effective than passive techniques to improve power quality and to solve harmonic and power factor problems due to nonlinear loads. this paper proposes a control scheme based on the instantaneous active and reactive power. the inverter of this active filter is a three-phase, two-level converter. space vector technique is used as modulators and pattern genera...

A non-isolated DC/DC converter with high transfer gain is proposed in this paper. The presented converter consists of the switched inductor and three-level converters. The DC/DC power converter is three-level boost converter to convert the output voltage of the DC source into two voltage sources. The main advantages of DC/DC converter are using low voltage semiconductors and high gain voltage. ...

By observation of electrical resonances, switched reluctance drives can be controlled without position sensor. The range of resonance frequencies is defined by the position-dependent phase inductance and a parasitic capacitance, mainly associated with the converter switches. In this paper, an analytical model is used to predict the aligned resonance frequency, taking into account material and g...

In this work we propose an approach to reduce the digitization noise for a given dynamic range, i.e., the number of bits, of an analog to digital converter used in an NMR receiver. In this approach, the receiver gain is dynamically increased so that the free induction decay is recorded in such an emphasized way that the decaying signal is digitized using as many number of bits as possible, and ...

In this paper an efficient high step-up converter with a coupled- inductor with soft- switching operation is presented. The proposed topology includes a coupled-inductor boost converter for raising the voltage gain. Moreover, a simple auxiliary resonant circuit composed of an auxiliary switch, a clamping diode and a resonant tank (inductor, capacitor), is adopted in this paper. The coupled-indu...

1 Introduction Nuclear magnetic resonance, NMR, and X-ray crystallography are the only two methods that can be applied to the study of three-dimensional molecular structures of proteins at atomic resolution. NMR spectroscopy is the only method that allows the determination of three-dimensional structures of proteins molecules in the solution phase.

This paper presents an implementation of open loop and closed loop control of Quadratic boost converter using PID controller.  Quadratic boost converter consists of boost converter and fly back converter driven by a single switch. Quadratic boost converter QBC is designed especially for regulating the DC interface between various micro sources and dc-ac inverter to electricity grid. Quadratic b...

In this manuscript, the experimental setup was designed and fabricated for optimizing the parameters of a catalytic converter of INDICA V2 exhaust system. Three turbulence intensify devices, namely Swirl Venturi, Swirl Blades and Swirl Contour, were close-fitted before the catalytic converter. The heating element is embedded in its body and thermocouples are used for knowing the performance at ...

This paper presents the analysin ,design and implementation of a high voltage ratio topology of DC-DC converter. The DC-DC converter has high voltage ratio with reduced input current, output voltage and output current ripple, and also reduces the voltage and current rating of power electronics components and compared with conventional boost converter. The voltage stress on the switches are  red...