OBJECTIVE The purpose of this study was to investigate the polymerization temperature of a bulk filled composite resin light-activated with various light curing modes using infrared thermography according to the curing depth and approximation to the cavity wall. MATERIAL AND METHODS Composite resin (AeliteFlo, Bisco, Schaumburg, IL, USA) was inserted into a Class II cavity prepared in the Tef...

Even though recently published results indicated that residual strains of the epoxy molding compound (EMC) play a key role on the warpage values and shapes of the plastic ball grid array (PBGA) packages, it is still unknown about how these residual strains build up and change during the manufacturing and infrared (IR) solder reflow processes. The purpose of this study is to quantify the residua...

The curing reaction of a commercial cold-curing structural epoxy resin, specifically formulated for civil engineering applications, was analyzed by thermal analysis as a function of the curing time and the sample thickness. Original and remarkable results regarding the effects of curing time on the glass transition temperature and on the residual heat of reaction of the cold-cured epoxy were ob...

one of the common methods to cure unsaturated polyester resins is to use dual initiators. in order to produce an appropriate composite, it is necessary to know the effect of dual initiators on curing behavior. in this paper the effect of benzoyl peroxide, bpo, and tertiary butyl perbenzoate, tbpb, and their mixtures on thermal curing of an unsaturated polyester resin have been investigated. bpo...

In this study bio-based bio-phenol-formaldehyde (BPF) resoles were prepared using hydrolytically depolymerized Kraft lignin (DKL) as bio-phenol to partially substitute phenol. The effects of phenol substitution ratio, weight-average molecular weight (Mw) of DKL and formaldehyde-to-phenol (F/P) ratio were also investigated to find the optimum curing temperature for BPF resoles. The results indic...

Dimethacrylate polymers and silica are most commonly used as matrix resins and fillers for dental composites. Bis-GMA, UDMA are used as base monomers and TEGDMA as a diluent monomer for dental resin preparation. Pure UDMA, mixtures of UDMA:TEGDMA and Bis-GMA:TEGDMA 50:50 and 75:25 were mixed with silanized silica at compositions of monomer:fillers 30:70 and 40:60 (weight ratio). Heat curing of ...

Polydimethylsiloxane (PDMS) is a commercially available physically and chemically stable silicone rubber. It has a unique flexibility with a shear elastic modulus G ≈ 250 kPa due to one of the lowest glass transition temperatures of any polymer (Tg ≈ −125 ◦C). Further properties of PDMS are a low change in the shear elastic modulus versus temperature (1.1 kPa ◦C−1), virtually no change in G ver...

present research involves the complete simulation of pultrusion manufacturing process of glass/polyester composites. for that purpose, the curing process is divided to two liquid and gel-solid phases. the physical characteristics of the resin consist of specific heat, viscosity and coefficient of heat transfer changes with variations of temperature and increasing the degree of curing process (α...

in this article the transient heat transfer in rubber parts has been studied. this study is usefull for estimation of the minimum curing time of the rubber parts and thereby to ensure the quality of the rubber. also is the temperature distribution during the rubber curing is well know, then the curing time could accurately be estimated, which will lead to a better curing process. in this regard...