Based on the experimental study for seismic performance of FRP reinforced concrete beam-column joints, two-storey two-span plane frames were taken for examples, in which the static elastoplastic analysis (the pushover method) was carried on the joints of the FRP strengthened concrete frames, and then the comparative analysis was made on seismic performance of RFP strengthened frame structure th...

The basic function of a gas distribution system, essentially composed of buried pipelines, reduction stations, and demand nodes, is to deliver gas from sources to end users. The objective of the article is to discuss the evaluation of seismic risk of gas networks in compliance with the performance-based earthquake engineering framework adapted to spatially distributed systems. In particular, th...

Liquefied natural gas (LNG) terminals, one of the lifeline facilities, need to be protected by a proper seismic design against extreme earthquakes. An LNG terminal consists of a series of process facilities that are connected by pipelines of various sizes. Boil-off gas (BOG) compressor is one of the critical process facilities whose failure will cause the functional failure of the LNG terminal....

A damage-based approach for the performance-based seismic assessment of reinforced concrete frame structures is proposed. A new methodology for structural damage assessment is developed that utilizes response information at the material level in each section fiber. The concept of the damage evolution is analyzed at the section level and the computed damage is calibrated with observed experiment...

In this study, a frame work for verification of famous seismic codes is utilized. To verify the seismic codes performance, damage quantity of RC frames is compared with the target performance. Due to the randomness property of seismic design and earthquake loads excitation, in this paper, fragility curves are developed. These diagrams are utilized to evaluate performance level of structures whi...

A quick group search optimizer (QGSO) is an intelligent optimization algorithm which has been applied in structural optimal design, including the hinged spatial structural system. The accuracy and convergence rate of QGSO are feasible to deal with a spatial structural system. In this paper, the QGSO algorithm optimization is adopted in seismic research of steel frames with semi-rigid connection...

Depending on the tectonic activities, most buildings subject to multiple earthquakes, while a single design earthquake is suggested in most seismic design codes. Perhaps, the lack of easy assessment to second shock information and sometimes use of inappropriate methods in estimating these features cause successive earthquakes mainly were ignored in the analysis procedure. In order to overcome t...

This paper proposes an indicator of seismic performance based on life-cycle cost of a building. It is expressed as a ratio of lifetime damage loss to life-cycle cost and determines the seismic performance of isolated buildings. Major factors are considered, including uncertainty in hazard demand and structural capacity, initial costs, and expected loss during earthquakes. Thus, a high indicator...

Revolutionary changes which have taken place in the USA over the past 50 years in earthquake engineering as applied to transportation structures (highway bridges, and transit and high-speed rail aerial structures) are reviewed, giving emphasis to seismic design criteria, characterization of seismic ground motions, dual strategy of seismic design, modelling and dynamic analysis, assessment of se...

Dijkstra’s single-source shortest path algorithm has been applied in seismic tomography to determine paths of minimum travel time from all locations in a 3D earth model to sensors used in seismic experiments. An iterative data parallel algorithm is formulated for seismic tomography based on the Bellman-Ford-Moore (BFM) algorithm. Performance is demonstrated for OpenMP and OpenCL.