The growth of transverse cracks under expanding spherical contact in a model system consisted of soda-lime glass bonded to a polycarbonate substrate is observed in situ from below or from the polished edge of the bilayer. Abrasion or chemical etching is employed on the coating surfaces to control the initial fracture. In the limit case of monoliths, the crack mouth becomes fully engulfed by the...

Design of thinned semi-elliptical and quarter-elliptical antenna arrays, with uniform excitation and uniform spacing using genetic algorithm (GA) optimization, is presented in this paper. Thinned arrays produce narrow directive beam without causing major degradation of fully populated antenna arrays. Semi-elliptical array contains antenna elements along half of the elliptical geometry and quart...

This paper presents a study on fatigue life predictions in three polymer particle composites with different volume fractions of filler and different particle sizes. Central hole notched specimens were analysed using a fracture mechanics approach. A solution for the stress intensity factor of corner cracks at a hole was obtained using the finite element method and considering quarter-circular an...

The propagation rate of a fatigue crack in nodular cast iron, loaded cyclic tension, has been studied situ by X-ray computed tomography and digital volume correlation. semi-elliptical initiated from an asymmetric corner notch evolved to semi-circular shape, initially with higher growth towards one edge the before along front became essentially independent position. phase congruency displacement...

We present a modeling technique for the interaction of an elliptical-shape crack in a metal with an open-ended waveguide. The crack is first modeled by an appropriate number of short rectangular waveguides. The mode-matching technique is then used to calculate the scattering matrix of the new segmented waveguide structure. The probe reflection coefficient of the dominant mode is finally calcula...