Adhesion and subsequent growth of microorganisms on material surfaces are a major concern in many biomedical applications. Currently, various polymers are immobilized on material surfaces to prevent microbial colonization. However, there are several challenges with regard to the coating materials, including their inability to kill microorganisms, complexity of surface grafting, limited durabili...

Surface-active polymers that display nonfouling properties and carry binding groups that can adsorb onto different substrates are highly desirable. We present a postmodification protocol of an active-ester-containing polymer that allows the creation of such a versatile platform. Poly(pentafluorophenyl acrylate) has been postmodified with a fixed grafting ratio of a nonfouling function (mPEG) an...

Research on "post-metallocene" polymerization catalysis ranges methodologically from fundamental mechanistic studies of polymerization reactions over catalyst design to material properties of the polyolefins prepared. A common goal of these studies is the creation of practically useful new polyolefin materials or polymerization processes. This Review gives a comprehensive overview of post-metal...

Due to easy availability of cheaper raw material and increase in new applications, the use of polyolefins in various industries is becoming a major priority. The Middle East region, on account of its vast oil and gas reserves has, in the last decade or so, been developing many new petrochemical complexes with their expansion into colossal polyolefin production capacities. The predictions are th...

OBJECTIVES To evaluate the effect of silane application and silane heat treatment on lithium-disilicate ceramic when bonded to composite resin. METHODS Twelve blocks of lithium-disilicate (LD) ceramic were fabricated and bonding surfaces were etched using 9.5% hydrofluoric acid (90 seconds). Three experimental groups resulted from the various surface treatment combinations, which included, no...

This paper presents the influence of polyolefin fiber on flexural and shear attitude flat slabs. Three slab sets (80 cm × 80 cm) were tested, each with a thickness 10 cm. In first set (S1), effect content behavior was considered. Therefore, four specimens cast, one which considered as control specimen no content, while other three included fibers at 0.5, 1, 1.5 percent total concrete volume. Th...

OBJECTIVE The aim of this study was to investigate the effect of silane in the repair of old and new resin-composite restorations. METHOD Part 1: repair of old composite was performed on 60 resin-composite substrates that were 6 years old and were made of six different brands of composite. Three experiments were performed. In the first experiment, the substrates were ground flat and composite...

Mesoporous silicas, especially those exhibiting ordered pore systems and uniform pore diameters, have shown great potential for sensing applications in recent years. Morphological control grants them versatility in the method of deployment whether as bulk powders, monoliths, thin films, or embedded in coatings. High surface areas and pore sizes greater than 2 nm make them effective as adsorbent...

OBJECTIVE Glutamate-aspartate cardioplegia additive solution (GACAS) is used to enhance myocardial preservation and left ventricular function during some cardiac surgeries. This study was designed to evaluate the stability of compounded GACAS stored in sterile polyolefin intravenous (IV) bags. The goal is to extend the default USP beyond-use date (BUD) and reduce unnecessary inventory waste. ...

The vast majority of commercial polyolefins are semi-crystalline materials. Depending on the chemical composition and tacticity, their melting temperatures range from ambient to temperatures exceeding 160 C. Polyolefins form various crystalline structures that can be investigated with microscopic, spectroscopic and scattering techniques. When a semi-crystalline polyolefin is dissolved in a solv...