Both the hardening process and formation of microstructure of concrete are significantly influenced by the curing condition. The capillary absorption of concrete is closely related to the structure and distribution of the pores within the material. This paper presents an experimental study on the influence of four curing conditions, i.e., standard curing, natural curing, water curing, and seale...

As discussed in Part I, the type of curing light and curing mode impact the polymerization kinetics of resin-based composite (RBC) materials. Major changes in light-curing units and curing modes have occurred. The type of curing light and mode employed affects the polymerization shrinkage and associated stresses, microhardness, depth of cure, degree of conversion, and color change of RBCs. Thes...

We examine the influence of heterogeneous curing rates for a SIS model, used for malware spreading on the Internet, information dissemination in unreliable networks, and propagation of failures in networks. The topology structures considered are the regular graph which represents the homogenous network structures and the complete bi-partite graph which represents the hierarchical network struct...

High performance concrete (HPC) bridge decks are prone to premature cracking if movement is restrained. Internal curing (IC) can reduce shrinkage cracking in concrete structures, thus improving their performance and service life. However, there is very limited information available in the literature on the possible extension of service life due to internal curing. This paper addresses this ques...

We examine the influence of heterogeneous curing rates for a SIS model, used for malware spreading on the Internet, information dissemination in unreliable networks, and propagation of failures in networks. The topology structures considered are the regular graph which represents the homogenous network structures and the complete bi-partite graph which represents the hierarchical network struct...

OBJECTIVE The purpose of this study was to compare the effect of light curing distance on the cytotoxicity of five resin composites cured with three high-power light curing units. STUDY DESIGN Seven cylindrical discs of each material (Grandio®, Voco; Filtek™ Z250, 3M ESPE; Clearfil™ AP-X, Kuraray Co. Ltd.; Aelite™ LS, Bisco Inc. and Simile®, Pentron) were cured. For curing, soft-up mode of qu...

The curing reaction of a commercial cold-curing structural epoxy resin, specifically formulated for civil engineering applications, was analyzed by thermal analysis as a function of the curing time and the sample thickness. Original and remarkable results regarding the effects of curing time on the glass transition temperature and on the residual heat of reaction of the cold-cured epoxy were ob...

Abstract-Predicting 28-day compressive strength of concrete is an important research task for many years. In this study, concrete specimens were cured in two phases, initially at room temperature for a maximum of 30 h and later at a higher temperature for accelerated curing for a maximum of 3 h. Using the early strength obtained after the two-phase curing and the curing parameters, regression e...

as regards if curing stops for some time and then resumes again, then strength gain will also stop and reactive, in this study with choose suitable curing conditions after improper first curing (recurring) for normal and silica-fume concrete, effect of this curing conditions on strength and permeability was investigated. the results from tests such as compressive strength, capillary water absor...

In order to investigate the effects of microwave curing on the microstructure of the interfacial transition zone of mortar prepared with a composite binder containing glass powder and to explain the mechanism of microwave curing on the improvement of compressive strength, in this study, the compressive strength of mortar under microwave curing was compared against mortar cured using (a) normal ...