Abstract: Despite having a number of advantages, reinforced concrete can suffer rebar corrosion in high–chloride media, resulting in failure of reinforced concrete structures. In this research the corrosion inhibition capability of the mixture of calcium and ammonium nitrate of steel rebar corrosion was investigated in the simulated concrete pore solution. Cyclic polarization and Electroche...

Enhancement of the response of reinforced concrete (RC) beams using fiber-reinforced polymer (FRP) reinforcement bars has become a popular structural technique over the past two decades due to the well-known advantages of FRP composites including their high strength-to-weight ratio and excellent corrosion resistance. Thisstudy presents n...

ABSTRACT: The absence of explicit guidelines for the rehabilitation of existing pole structures was the motivation to investigate the effectiveness of steel jacketing for the retrofitting of self-supporting steel and reinforced concrete telecommunication poles. The present study describes a numerical simulation of preand post-retrofitted conditions of the pole structures subjected to seismic ha...

Due to the rapid industrialization taking place globally, the problems generated are acute shortage of construction material and increasing in productivity of wastes. The production and consumption of plastic and the rate at which solid plastic waste (SPW) are created have increased considerably. Plastics constitute 12.3% of total waste produced most of which is from discarded water bottles. Th...

The project aims to study tensile softening behavior of fiber reinforced concrete .Concrete is very much weak in tension but by addition of randomly oriented short crimped steel fibers will change the behavior from brittle to ductile. In the present work, the steel fibers were added at the volume fraction, being 0%, 0.5%, 1%, 1.5% to the normal strength concrete and high strength concrete. The ...

7 Corrosion of reinforcing steel in concrete can alter the interface between the steel and concrete and 8 thus affects the bond mechanism. This subsequently influences the behaviour of reinforced 9 concrete structures in terms of their safety and serviceability. The present paper attempts to 10 develop a numerical method that can simulate the behaviour of reinforced concrete walls subjected 11 ...

7 Corrosion of reinforcing steel in concrete can alter the interface between the steel and concrete and 8 thus affects the bond mechanism. This subsequently influences the behaviour of reinforced 9 concrete structures in terms of their safety and serviceability. The present paper attempts to 10 develop a numerical method that can simulate the behaviour of reinforced concrete walls subjected 11 ...

SPEAR 3 is an upgrade of the 18-cell SPEAR 2 storage ring to 3GeV beam energy, 18nm-radian emittance and up to 500mA circulating current. The existing arrangement of photon beam lines remains largely unchanged, but opportunities arise for additional ID and dipole radiation exit ports. For optimum beam stability, the entire tunnel floor will be excavated and replaced with reinforced concrete. Th...

It is observed that, reinforced concrete beams failed due to flexure but in case of deep beam failure occur due to shear. Deep beams may be defined as the beam where shear span to depth ratio less than 2. A number of researchers already proposed various approach to predict the ultimate strength of deep beams. In this study a newer approach is developed to calculate the ultimate shear strength o...

In this paper, a new roofing system is introduced, which is constructued using the precast composite sandwich panels. This roofing sandwich panels system consists of three kinds of precast concrete sandwich panels including capital panels, beam or between columns panels, and slab or middle panels. The panels are composed of three layers; A high strength reinforced concrete top layer. A thick la...