The flow stress and dynamic recrystallization behavior of A356 aluminum alloy was studied, with a strain rate ranging from 0.001 s?1 to 1 temperature 300 500 °C. Both the true stress–strain curves microstructure examination indicated that occurred during isothermal compression. A physical model based on Arrhenius equation developed, this can accurately predict fraction Finally, implemented in F...

An evaluation of the failures of coal under variable conditions in relation to the stability of coal pillars is an important issue for coal mining. This paper presents the results of an experimental investigation of the mechanical behavior of brittle coal under plane-strain biaxial stress state (PSBSS) compression. The synthetic specimens were meant to test the ductile properties. Modified surf...

Three kinds of recycled aggregate concretes (RACs), with six different replacement rates at four ages, are subjected to the standard cube axial compression test study mechanical properties. Failure modes, compressive strength, stress-strain curves, peak strain, and elastic modulus RACs systematically analysed. In addition, three equations proposed for describe relationship between strength rate...

The hot deformation of TA15 titanium alloy was studied by the compression test on Gleeble-3800 thermal simulation equipment. true stress-strain curves at temperature 1123-1223K and strain rate 0.001-1s -1 were obtained.. results show that flow stress increases with decreasing temperature, as increases. And process is accompanied work hardening dynamic recovery recrystallization. Based alloy, Ar...

The deformation of polycrystalline beryllium to strains of 60.8 pct in uniaxial tension and compression was studied by neutron diffraction and modeled using an elasto-plastic self-consistent (EPSC) model. The beryllium response is asymmetric with respect to tension and compression in both the macroscopic behavior, as displayed in the stress/strain curve, and the microscopic lattice response. Th...

In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results s...

Laminated fibre-reinforced polymer (FRP) tubes are increasingly used as compression members in large-span spatial structures due to their high bearing capacity, corrosion resistance, and superior stability compared high-strength steel pipes. In this study, axial tests were conducted on slender BFRP evaluate characteristics members. The results indicated that exhibited three distinct failure mod...

The rotary bending fatigue properties of medical-grade Nitinol wires were investigated under conditions of 0.5-10% strain amplitudes to a maximum of 10(7) cycles. The results from this study provide insight into the behavior of Nitinol under fully reversed (εmin/εmax=-1) fatigue conditions for three compositions, two surface conditions and three test temperatures. For pseudoelastic conditions t...