We focus on the development and implementation of an environmental (hot-dry or hot-humid air) testing methodology for adhesively bonded laminates under maximum strain energy release rate (SERR) control. The technique overcomes disadvantages displacement- force-controlled fatigue crack growth testing. Fracture mechanics based double cantilever beam (DCB) specimens comprising steel/epoxy- glass/p...

Methods of damage development analyses for various types of composite materials such as 3-D woven composite have not been established sufficiently because it is quite difficult to simulate the failure propagation. A FEM simulation of failure process of 3-D composite was executed by Mibayashi including the thermal residual stresses after the curing process, and the deformations and stresses calc...

Fracture toughness, critical strain energy release rate and critical stress intensity factor were determined for lathe-cut, spherical, admixed, and two atomized high-copper dental amalgams. At a loading rate of 0.005cm min -1 for 24-hour samples, the spherical amalgam had the highest resistance to unstable crack propagation. At a loading rate of 0.05 cm min -1 for both 24-hour and one-month sam...

This paper studies the application of an inverse methodology for problem solving in fracture mechanics using the finite element analysis. The method was applied to both detection of subsurface cracks and the study of propagating cracks. The procedure for detection of subsurface cracks uses a first order optimization analysis coupled with a penalty function to solve for the unknown geometric par...

advanced high strength steels (ahss) have recently attracted great attention because of their superior mechanical properties. a modern group of these steels, known as twinning induced plasticity (twip) steels, shows a unique combination of strength and ductility even at high rates of strain. in order to examine the functionality of such steels in dynamic loading conditions, their mechanical beh...

background recently, assessment of the atrial motion and deformation indices obtained via doppler myocardial imaging (dmi) has been proposed as a new method of exploring the atrial function. objective our aim was to assess the right atrial (ra) regional function using myocardial velocities, strain, and strain rate imaging (sri) and compare it with the function of the inter-atrial septum (ias) a...

in this paper, the mean value of strain energy density criterion has been used to predict the critical fracture load in specimens with u-shaped notch under bending loads. an equation for calculation of averaged strain energy density in this zone has been presented. bending loads under mode i have been considered. two cases have been studied: 1) the control volume only includes the semicircular ...