The safety of the driving experience and manoeuvrability of a vehicle can be improved by detecting the strain in tyres. To measure strain accurately in rubber, the strain sensor needs to be flexible so that it does not deform the medium that it is measuring. In this work, a novel flexible bond wire capacitive strain sensor for measuring the strain in tyres is developed, fabricated and calibrate...

We demonstrated a unique rectangular air bubble by means of splicing two sections of standard single mode fibers together and tapering the splicing joint. Such an air bubble can be used to develop a promising high-sensitivity strain sensor based on Fabry-Perot interference. The sensitivity of the strain sensor with a cavity length of about 61 μm and a wall thickness of about 1 μm was measured t...

Title of Document: RFID SENSOR-DRIVEN STRUCTURAL CONDITION MONITORING IN INTEGRATED BUILDING INFORMATION MODELING ENVIRONMENT Linjia Bai, Doctor of Philosophy, 2013 Directed By: Yunfeng Zhang, Associate Professor Department of Civil and Environmental Engineering Steel structures are very popular structural forms for both buildings and bridges. Under extreme loading such as strong earthquakes or...

Critical buildings such as hospitals and police stations must remain functional immediately following a major earthquake event. Due to earthquake effects, they often experience large strains, leading to progressive collapses. Therefore, monitoring and assessing the large strain condition of critical buildings is of paramount importance to post-earthquake responses and evacuations in earthquake-...

FBG sensors offer many advantages, such as a lack of sensitivity to electromagnetic waves, small size, high durability, and high sensitivity. However, their maximum strain measurement range is lower than the yield strain range (about 1.0%) of steel strands when embedded in steel strands. This study proposes a new FBG sensing technique in which an FBG sensor is recoated with polyimide and protec...

In this article, we report on the new design of a miniaturized strain microsensor. The proposed sensor utilizes the piezoresistive properties of doped single crystal silicon. Employing the Micro Electro Mechanical Systems (MEMS) technology, high sensor sensitivities and resolutions have been achieved. The current sensor design employs different levels of signal amplifications. These amplificati...

We report remote strain and displacement measurement during elastic and plastic deformation using a metamaterial-based wireless and passive sensor. The sensor is made of a comb-like nested split ring resonator (NSRR) probe operating in the near-field of an antenna, which functions as both the transmitter and the receiver. The NSRR probe is fixed on a standard steel reinforcing bar (rebar), and ...

The authors have recently developed a soft-elastomeric capacitive (SEC)-based thin film sensor for monitoring strain on mesosurfaces. Arranged in a network configuration, the sensing system is analogous to a biological skin, where local strain can be monitored over a global area. Under plane stress conditions, the sensor output contains the additive measurement of the two principal strain compo...

In this work a low cost sensor has been developed to measure three-directional forces. The theory, design and sensor construction details are presented. It was constructed by using commercial strain gauges. Finite element method was adopted to optimize the structure dimensions, and improve the sensitivity of force sensor by distributing the sensing stress on the maximum strain positions. A hard...