Cellulosic paper is thermolabile and its strength properties tend to decrease under high temperature conditions. In this work, the effects of aluminum trihydrate filler on the tensile and burst strength of paper prepared from bleached wood pulps were investigated. The use of aluminum trihydrate maintained the tensile and burst strength of paper sheet dried at 200 °C for 4 hours. Thermogravimetr...

Fiber reinforced polymer (FRP) laminates are being used as external reinforcement for strengthening concrete members. The performance of unidirectional FRP laminates is highly dependent on fiber orientation with respect to applied load direction. In the case of fabrication by manual lay-up, it is possible to have fiber plies installed with improper orientation. In this project, the degradation ...

This study investigated the effect of exposure to elevated temperature on the yield strength of single-shear nail connections when subjected to lateral loading. Solid sawn lumber and laminated veneer lumber were used as framing members and two different thicknesses of both oriented strand board and plywood were used as the sheathing members. The connection geometries evaluated were typical of t...

titanium and its alloy are known as important load-bearing biomaterials. the major drawbacks of these metals are fibrous formation and low corrosion rate after implantation. the surface modification of biomedical implants through various methods such as plasma spray improves their osseointegration and clinical lifetime. different materials have been already used as coatings on biomedical implan...

The principal effects of mass degradation on polymer matrix composites (PMCs) are the decay of mechanical properties such as strength, elongation, and resilience. This degradation is a common problem of the PMCs under thermal cycling conditions. In this article, composite degradation was investigated by measurement of total mass loss (TML) using the Taguchi approach. Thermal cycling tests were ...