In the present paper, we investigate the influence of corrosion driving forces and interfacial toughness for a coated material subjected to mechanical loading. If the protective coating is cracked, the substrate material may become exposed to a corrosive media. For a stress corrosion sensitive substrate material, this may lead to detrimental crack growth. A crack is assumed to grow by anodic di...

Phase-field models for crack propagation enable the simulation of complex crack patterns without complex and expensive tracking and remeshing as cracks grow. In the setting without inertia, the crack evolution is obtained from a variational energetic starting point, and leads to an equation for the order parameter coupled to elastostatics. Careful mathematical analysis has shown that this is co...

The behavior of cleavage crack fronts at grain boundaries in free-standing silicon thin films is investigated through a microtensile experiment. In addition to the crystallographic orientation, the orientation of grain boundary plane also plays a critical role. With respect to the initial crack surface, if the inclination angle is relatively small, the crack tends to penetrate across the bounda...

In the present work, the effects of chemical compositions on the hydrogen blistering and hydrogen induced cracking of A350LF2 steel with different S contents were studied. Four types of A350LF2 steels were evaluated by immersing samples in H2S-saturated NACE solution. The hydrogen blistering, crack length rate(CLR), crack thickness rate(CTR) and crack sensitivity rate(CSR) were evaluated. The r...

The T ∗ ε integral was calculated numerically along an extending, tunneling crack front in an 8 mm thick, aluminum three-point bend (3PB) specimen, using a numerical model driven by experimentally obtained surface displacements. The model provided input to a contour integration for the T ∗ ε integral, via the Equivalent Domain Integral (EDI) method with incremental plasticity. Validity of the a...

This paper presents the results of a combined experimental and theoretical study of the fatigue crack initiation in LIGA Ni thin films with a thickness of 270 mm. The potential roles of surface oxide thickening and slip bands are explored for fatigue crack initiation. Surface oxides and roughness are characterized using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). T...

A modified geometric ray approach is used to predict he V(x,z) or the acoustic material signature of a circular point-focus scanning acoustic microscope for an isotropic surface containing a surface-breaking crack. The microscope r sponse isassumed to consist of a specularly reflected geometric contribution, and the leaky contribution due in part to surface waves cattered from the crack. The lo...

Previous studies showed that the surface wave transmission coefficient across a surface-breaking crack in concrete can be used to estimate the crack depth. However, inconsistencies in the surface wave transmission measurements limit the test accuracy and application of this technique. The inconsistencies come from near-field scattering by the crack tip and inconsistent sensor coupling condition...

Ah&met-The boundary element method is used to analyze the ACPD (alternating current potential drop) field perturbed by a semi-elliptical surface flaw in a metallic sheet. The depth of the penetration of the alternating current is assumed to be small as compared to the crack depth. This allows us to adopt the “unfolding” technique developed by Dover et al. [ASTM STP 722, 401-427 (1981)], which r...

We study the scaling of three-dimensional crack roughness using large-scale beam lattice systems. Our results for prenotched samples indicate that the crack surface is statistically isotropic, with the implication that experimental findings of anisotropy of fracture surface roughness in directions parallel and perpendicular to crack propagation is not due to the scalar or vectorial elasticity o...