The purpose of this study was to evaluate the mechanical behavior of three composites with nanoparticles Filtek Z350 XT (3M ESPE), Esthet X (Dentsply), Grandio (Voco) in enamel and body shades (A2) trough nanohardness, elastic modulus, compressive strength test, flexural strength test, diametral tensile strength, flexural modulus, weight filler content and Knoop microhardness. One sample of eac...

utilization of the new compatibilizers to improve matrix/filler interface adhesion and also, nanoparticles to improve the properties of wpc products have always been of interest to researchers. in this study, the effect of oxidized polypropylene in solution phase as a comptibilizer and nanoclay particles on the physical and mechanical properties of wood fiber reinforced polypropylene composite ...

Bamboo-bundle laminated veneer lumber (BLVL) was produced by joint lengthening technology. The objective of this study was to evaluate the effect of joint form and the values of key parameters on mechanical properties of BLVL. Two joint forms, i.e., finger joint and scarf joint, and two corresponding joint parameters, i.e., finger length and scarf angle, were investigated in laminates. The resu...

In this research, St37 and 316L steel sheets were welded using friction stir welding (FSW) process and effective parameters such as the rotational speed, linear speed of the tool, pin diameter, and their appropriate values were studied. The microstructure, hardness, and strength of the different welding regions were investigated. It was observed that in the stir zone (SZ), a mechanical operatio...

In this study the attempts to improve mechanical properties of highly-porous titanium dioxide scaffolds produced by polymer sponge replication method were investigated. Particularly the effect of two-step sintering at different temperatures on microstructure and mechanical properties (compression test) of the scaffolds were analysed. To this end microcomputed tomography and scanning electron mi...

For a long time, the geometry dimensions of tenons have been designed through empirical methods, which is not beneficial to designers and manufacturers results in more time spent construction greater amount waste wood materials. In this study, an optimal methodology combining finite element analysis (FEA) with response surface method (RSM) was proposed investigate effect tenon geometric (length...

In this study, the effects of various heat treatments on microstructure, mechanical and magnetic properties of HSLA-100 steel were evaluated. The heat treatments consisted of austenitizing at 900°C for 60 minutes, then quenching by different cooling rates via furnace, air, oil and water; and quenched specimens were aged at 600°C for one hour. Optical and field emission scanning electron m...

To investigate the effect of tempering treatment on mechanical properties and the microstructure of DIN 1.4021 Martensitic Stainless Steel, austenite treatment was conducted for the samples at 1000 ºC temperature for 60 min and then the samples were oil quenched. Later, tempering treatments were performed for the samples at 500 ºC and 700 ºC temperatures for 2 and 5 h, respectively; then quench...