Biomass size reduction is an important step in biomass densification and this article reviews reduction studies. Hammermilling technology had the advantage of low maintenance over other methods including crushing, shearing and rollermilling. A review of equipment design parameters showed that hammermill tip speed, power requirements, grinding rate, screen size, and clearance affect performance ...

The calibrated-leak balloon catheter, used for the selective catheterization of intracranial arteries, originally incorporated a silicone microballoon at its tip [1]. Latex balloons have now proven superior in elasticity and tensile strength when compared with balloons made of silicone [2] . Consequently, most workers construct the calibrated-leak balloon catheter by gluing a leaking latex micr...

A method of testing the tensile strength of the porcelain-gold bond has been developed. Tensile strengths of the bond are improved primarily by the formation of an oxide layer on the gold before baking the porcelain and not by the degree of gross surface roughness. The oxide layer may act either as a transition ayer or i t may create microsurface roughness. The gross surface roughness probably ...

This paper attempts to investigate the influence of the microstructure and mechanical property changes on sand casting and permanent die casting alloys by grain refinement, modification combined action of both (Al– 3Ti–1B + Al–10Sr) and without grain refinement and modification effect. The microstructures of the castings are studied by optical microscopes. The microstructure and mechanical prop...

Mg-9Al-1Si-1SiC composites with various initial microstructures prior to equal channel angular pressing (ECAP) were obtained by different pre-treatments (without and with homogenization treatment), and the resultant grain size, second phase and tensile properties of ECAPed composites were reported. The ECAPed composite with homogenization treatment (HT) exhibited finer grain size, higher fracti...

BACKGROUND To evaluate a potential correlation between flexural strength and indirect tensile strength in assessing the mechanical strength of resin composite cements. METHODS Flexural strength (n = 5) and indirect tensile strength (n = 5) of 7 resin composite cements (RelyX Unicem 2 Automix [RXU], Panavia SA [PSA], Clearfil SA [CSA], Panavia F2.0 [PF2], Multilink Implant [MLI], DuoCem [DCM],...

Self assembling wire networks typically evolve to minimize the resistance across electrical contacts which are frequently used in a manner comparable to Hebbian learning. In this work, we demonstrate that electrical fields can also be used to cause an increase in the resistance of the wire network. We show that if such a wire is exposed to a transverse electric field, the wire is deformed in a ...

This work presents the effect of various wear environments like 20% soil & 80% sand and 40% soil & 60% sand on as received and carburized mild steel sample at different load like 75N, 200N & 375N and at different tempering temperature like 200oC, 250oC & 300oC. The mild steel sample was carburized at 950oC. The heat treatment after carburization has been acknowledge that at some instant it impr...

in this research, the possibility of using high percentage of lignocellulosic fibers in making natural fiber-thermoplastic composite was studied. three weight percentages of bagasse flour namely 40, 55 and 70 percents were chosen. mapp was used as coupling agent at two weight percentages of pp, namely 0, 4 and 6 percents. tensile strength was measured applying instron 6025. the results showed t...