DC electric potential technique has been used to monitor crack growth in conductive materials. A constant DC current is passed through these materials and the crack length is measured through the changes in the electrical voltage at the crack mouth. However, this method is not applicable in crack growth measurement in nonconductive materials or adhesively bonded joints. For these materials, a n...

The role of prism decussation on the crack growth resistance of human enamel is evaluated. Miniature inset compact tension (CT) specimens embodying a section of cuspal enamel were subjected to Mode I cyclic or monotonic loads. Cracks were grown in either the forward (from outer enamel inwards) or reverse (from inner enamel outwards) direction and the responses were compared quantitatively. Resu...

The changes in elastic lattice-strain profiles and plastic zone around the fatigue crack in a compact-tension specimen were investigated during monotonic tensile loading and unloading cycles using neutron diffraction. Spatially-resolved strain measurements were performed on a 316 LN stainless steel to determine the in-plane (parallel to the loading direction) lattice-strain profiles ahead of th...

The analytical approach used to develop a novel fatigue crack growth coupon for highly plastic stress field condition is presented in this paper. The flight hardware investigated is a large separation bolt that has a deep notch, which produces a large plastic zone at the notch root when highly loaded. Four test specimen configurations are analyzed in an attempt to match the elastic-plastic stre...

In this paper, the general plane problem for an infinite strip containing multiple cracks perpendicular to its boundaries is considered. The problem is reduced to a system of singular integral equations. Two specific problems of practical interest are then studied in detail. The first is the investigation of the interaction effect of multiple edge cracks in a plate or beam under tension or bend...

This paper deals with a procedure to calculate the elastic stress intensity factors for arbitrary-shaped cracks in plane stress and plane strain problems. An assumed displacement.hybrid finite element model is employed wherein the unknowns in the final algebraic system of equations are the nodal displacements and the elastic stress intensity factors. Special elements, which contain proper singu...

We report the thermally induced unconventional cracking of graphene to generate zigzag edges. This crystallography-selective cracking was observed for as-grown graphene films immediately following the cooling process subsequent to chemical vapor deposition (CVD) on Cu foil. Results from Raman spectroscopy show that the crack-derived edges have smoother zigzag edges than the chemically formed gr...

The stress field near the tip of a crack in a plate subjected to membrane and bending loads and undergoing large deflections, is investigated by performing an asymptotic analysis in the context of von Karman plate theory. It is demonstrated that the character of the near tip fields is identical to those of the linear plate theory. However, the determination of the crack tip stress intensity fac...

This paper focuses on the analysis of the partial differential equations arising from a new approach to modeling brittle fracture based on an extension of continuum mechanics to the nanoscale. It is shown that ascribing constant surface tension to the fracture surfaces and using the appropriate crack surface boundary condition given by the jump momentum balance, leads to a sharp crack opening p...

In this paper, we’ll answer several abstract, formal questions about the nature of crack growth and nucleation. Bringing a field theory point of view to fracture illuminates things in what I hope will be an entertaining way. Formally, what is the crack nucleation rate? Fracture is an instability of elastic theory under tension. For thermally nucleated cracks, there is an analogy with supercoole...