This paper presents the study on the mechanism of heat transport in multilayer solid body with the assumption that the heat transfer proceeds with the aid of thermal conductivity. It presents a test conducted with lock-in thermography on multilayer structure with implanted defect. The structure is made from materials of different thermal conductivity k. Different layers of tested structure desc...

Thermal transport measurements in multi-wall carbon nanotube (MWCNT) bundles at elevated temperatures up to 830 K are reported using a novel generalized electrothermal technique. Compared with individual CNTs, the thermal conductivity (k) of MWCNT bundles is two to three orders of magnitude lower, suggesting the thermal transport in MWCNT bundles is dominated by the tube-to-tube thermal contact...

Electrowetting (EW)-induced droplet motion has been studied over the last decade in view of its promising applications in the field of microfluidics. The objective of the present work is to analyze the physics underlying two specific EW-based applications for microelectronics thermal management. The first of these involves heat absorption by liquid droplets moving on the surface of a chip under...

The main objective of the work reported here is to assess factors that could affect the outcome of a proposed open flame test for barrier fabrics (BF-open flame test). The BF-open flame test characterizes barrier effectiveness by monitoring the ignition of a flexible polyurethane foam (FPUF) layer placed in contact with the upper side of the barrier fabric, exposed to a burner flame from below....

REBCO coated conductors (CCs) have the potential to widen considerably the application areas of superconductivity. Quench protection of REBCO-based devices represents one of the major obstacles to this expansion. Thermal conductivity data are mandatory ingredients for quench simulation studies. In particular, the transverse thermal conductivity (kT) of the CC plays a key role in case of quenche...

A new structure thermal vacuum sensor with two pn junction diodes, Th-A and Th-B, as a high sensitive temperature sensor working like a thermistor and a micro heater formed on a micro air‒bridge is proposed. The micro air‒bridge is separated into two regions of A and B. The Th-A measures the temperature of the micro-heater formed on the region A and the Th-B does that of the region B which is c...

S. Bruce, A. Trasser, M. Birk, A. Rydberg and H. Schumacher. Uppsala University, Box 534, S-751 21 Uppsala, Sweden. University of Ulm, Abt. EBS, D-89069 Ulm, Germany. Abstract A novel method for finding the thermal time constant of HBTs is proposed. It utilizes small signal measurements in the frequency domain of the typical negative differential resistance found in the active region, i.e., nor...

Negative differential thermal resistance (NDTR) can be generated for any one-dimensional heat flow with a temperature-dependent thermal conductivity. In a system-independent scaling analysis, the general condition for the occurrence of NDTR is found to be an inequality with three scaling exponents: n1n2 < −(1 + n3), where n1 ∈ (−∞,+∞) describes a particular way of varying the temperature differ...

Thermal death of cancerous cells may be induced by radiating single-walled carbon nanotubes (SWNTs) selectively attached via functionalization to the targeted cells. A distribution of SWNTs inside cancerous cells, on their surface, or in the inter-cellular fluid may occur during this treatment process. This work applies a random walk algorithm to calculate the effective thermal conductivity of ...

where ∆T and q are the temperature drop and heat flux across the interface. Predicting the thermal boundary resistance of semiconductor/semiconductor interfaces is important in devices where phonon interface scattering is a significant contributor to the overall thermal resistance (e.g., computer chips with high component density). Such predictions will also lead to improvements in the design o...