In this work, novel thin film composite membranes (TFCs) of poly (ether-6-block amide) (Pebax-1657) on a polyvinyl chloride (PVC) ultrafiltration membrane as support were prepared using inclined coating method for CO2 separation. Investigating the effects of top selective layer thickness formed by controlling the coating angle (15-60°) and polymer solution concentration (5-10 wt.%), ...

The purpose of this study was to compare the presence or absence of UV irradiation on the separation performance and morphology of the TiO2-assembled thin film membranes (in different concentrations). Furthermore, an attempt was made to show and compare the effect of the presence of TiO2 nanoparticles in aqueous and organic phases during the interfacial polymerization proc...

Two nanofiltration membranes, a Dow NF 270 polyamide thin film and a TriSep TS 80 polyamide thin film, were investigated for their retention of ionic species when filtering mine influenced water streams at a range of acidic pH values. The functional iso-electric point of the membranes, characterized by changes in retention over a small pH range, were examined by filtering solutions of sodium su...

Thin Film Composite – Polyamide (TFC-PA) are commonly used reverse osmosis (RO) membranes in water desalination and waste water applications. Their poor chlorine tolerance and fouling characteristics constrain the life and performance leading to stringent chemical pretreatment requirements. In this context, development of fouling resistant and chlorine tolerant RO membranes would be relevant to...

Thin-film composite (TFC) membranes show great potential in dye nanofiltration but their performance still required further improvement. In this work, ultra-small EMT zeolite nanocrystals were embedded into the interfacial polymerized polyamide (PA) layer supported on porous nylon via spray dispersion method and used separation. Ultra-small nanosized crystals with plate-like morphology synthesi...

Abstract: Different thickness of Cu2S thin films were prepared by vacuum evaporation under a pressure of 10-6 torr at an evaporation rate of 3Å /sec. Cu2S has direct band gap energy and indirect band gap energy at 1.2eV and 1.8 eV respectively. This paper presents the analysis of structural and optical properties of the Cu2S thin film by X-ray diffractometer (XRD) and UV-Vis-NIR Spectrophotomet...

titanium nitride-copper (tin-cu) nanocomposite films were deposited onto stainless steel substrate using hollow cathode discharge ion plating technique. the influence of cu content in the range of 2-7 at.% on the microstructure, morphology and mechanical properties of deposited films were investigated. structural properties of the films were studied by x-ray diffraction pattern. topography of t...

photocatalytic membranes exhibit great potential for water treatment since they combine the filtration and photo degradation in a single unit. although blending photocatalytic nanoparticles into polymeric thin film remains the simplest method to prepare the photocatalytic membrane, the entrapped photocatalyst showed less catalytic activity due to the agglomeration and shielding effects in the p...