High velocity oxy-fuel (HVOF)coating have shown high resistance to corrosion in fossil energy applications and it is generally accepted that mechanical failure, e.g. cracking or spalling, ultimately will determine coating lifetime. The use of HVOF thermal spray to apply coatings is one of the most commercially viable and allows the control of various parameters including powder particle velocit...

Technology assessment is a vital part of decision process in manufacturing, particularly for decisions on selection of new sustainable manufacturing processes. To assess these processes, a matrix approach is introduced and sustainability assessment models are developed. Case studies show that the matrix-based approach provides a flexible and practical way for sustainability evaluation of new ma...

Yttrium silicate coating[5, 6] is a promising candidate for oxidation resistant coating for its low oxygen diffusion coefficient and similar thermal expansion coefficient with silicon carbide. Webster et. al.[7] had prepared yttrium silicate coating on C/SiC using Y2O3/SiO2 slips by slip casting and sintering. The selected sintering parameters were 3 h at 1600 °C in flowing argon. The coating c...

The outermost nanometres of a poly(vinylidene difluoride) (PVdF) based coil coating have been investigated using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). A reference PVdF based coating formulation and three variations of this formulation were characterised by XPS. The addition of flow agent and/or acrylic co-polymers induced significa...

Impressive gains have been made in thermal spray coatings through material development and coating parameter selection. Nevertheless, it is usually up to shop personnel to develop a robot program to achieve the final coating. Coating programs are often developed using trial and error. Some motion and deposit analysis programs are available [1], [2]. However, they can be costly and require a lev...

OBJECTIVE The purpose of this study was to evaluate the effect of tooth coating material and finishing agent on bleached enamel surfaces after using KTP laser with 27% hydrogen peroxide. BACKGROUND DATA There have been few reports on the effects of tooth coating materials and finishing agents after bleaching. METHODS After 40 crowns of human extracted maxillary incisors were bleached by KTP...

This paper aims to explore the antibacterial property of nano Ag/TiO2 coating bracket for the common bacteria in oral cavity, and discuss its biocompatibility. Micro morphology in the surface of nano Ag/TiO2 coating bracket was detected by scanning electron microscope (SEM), and surface roughness of ordinary mental bracket, nano TiO2 coating bracket and nano Ag/TiO2 coating bracket were measure...

An Ni2Al3 coating was prepared via the electrodeposition of nickel followed by pack aluminization. Polarization curve and electrochemical impedance spectroscopy were performed to study the room temperature corrosion behavior of the coating in a 3.5 wt. % NaCl solution. The long-term impedance of the coating was also investigated after immersion for 30 days. Results show that the Ni2Al3 coating ...

Until about 1950, sugar coating was the first choice as coating agent for pharmaceutical preparation and much time & efforts were spent in perfecting the sugar coating techniques. Nobody ever was concerned about the problems like material cost, toxic effect due to coating or pollution etc. because the solvent used was always water. However, sugar coating technique was time consuming, affecting ...

The multilayer antimony-doped tin dioxide coating was obtained by cathodic deposition of multilayer metal-hydroxide coating with near 100-nm thickness layers on the alloy underlayer accompanied by the anodic oxidation of this coating. The potential regions of deposition of tin, antimony, tin-antimony alloy, and mixture of this metals and their hydroxides in the pyrophosphate-tartrate electrolyt...