A distribution system is an interface between the bulk power system and the consumers. The radial distribution system is popular among these because of its low cost and simple design. The voltage instability in the power system is characterized by a monotonic voltage drop, which is slow at first and becomes abrupt after some time when the system is unable to meet the increasing power demand. Th...

In this paper we present a novel technique for OTA-C filter realizations with finite zeros based on doubly loaded passive ladder networks. Only grounded capacitors are needed; all floating capacitors are replaced with active simulations eliminating bottom-plate parasitic capacitors and non-observable poles. Bandpass, highpass and bandstop filters are easily obtained from a lowpass OTA-C prototy...

This study focuses on the effects of different temperatures and temperature cycling on breakdown voltages of tantalum capacitors. High and low temperature tests and temperature cycling tests were done. In all tests the used temperatures were inside component’s operating temperature limits. After the tests, capacitors were tested for their breakdown voltage. According to results of this research...

In traditional tantalum capacitors, the construction consists of a tantalum anode, Ta2O5 dielectric, and MnO2 as the cathode. The benefit of having MnO2, as the cathode, is the self-healing effect it provides. The conversion of MnO2 to a higher resistive state allows fault sites within the dielectric to be shut off from the rest of the capacitor. To mitigate problems developed during reflow, it...

This dissertation presents voltage stabilization techniques for flying capacitors used in soft-switching multilevel active power filters. The proposed active filter has proved to be a solution for power system harmonics produced by static high power converters. However, voltage unbalance of the clamping capacitors in the active filter in practical applications was observed due to its unequal pa...

A mechanism for the switching behavior of (111)-oriented Pb(Zr, Ti)O3-based 1 × 1.5 μm2 capacitors has been investigated using three-dimensional piezoresponse force microscopy (3D-PFM). A combination of vertical and lateral piezoresponse force microscopy (VPFM and LPFM) has been used to map the out-of-plane and the in-plane components of the polarization. The three-dimensional polarization dist...

Consolidation of shunt capacitors plays an important role in radial distribution networks. Among many of their merits, line loss and total harmonic distortion (THD) reduction, voltage profile improvement and reactive power compensation can be the salient specifications of shunt capacitors. Studies show that non-optimal locations shunt capacitor units lead to increase loss, together with bad eff...

PCB designs, it becomes more challenging to manage clean power supplies. The number of decoupling capacitors used for a power delivery system keeps increasing as well. This causes two problems for board designers and layout engineers: 1) How to determine the numbers and the types of decoupling capacitors needed for a particular design; and 2) Where to place the selected capacitors on board. Wit...

This paper proposes a new N-multilevel topologies for T-type inverter. The proposed topologies constitute the single bridge legs with the shape of the rotated character “T” and a variable direct current-link circuit. The proposed topologies present higher efficiency and lower number of components compared with NPC topologies and nested multilevel topologies. Also, other topologies have been com...

Future microwave networks require miniature high-performance tunable elements such as switches, inductors, and capacitors. In this paper, high performance variable capacitor was fabricated by simple microelectromechanical systems (MEMS) technology. The capacitance and quality (Q) factor at 1 GHz are 0.792 pF and 51.6. The pull-in voltage is 13.5 V and the tuning ratio of the capacitor is more t...