Abstract Cement is a key material in the construction industry. However, this widespread use adversely affects environment. The replacement of cement with waste materials, mainly agricultural wastes, can reduce impact environmental pollution and result sustainable construction. Sago fine (SFW) fibrous residue from sago milling operations where physical treatment has been made. This study used S...

In this study, Wood Ash (WA) prepared from the uncontrolled burning of the saw dust is evaluated for its suitability as partial cement replacement in conventional concrete. The saw dust has been acquired from a wood polishing unit. The physical, chemical and mineralogical characteristics of WA is presented and analyzed. The strength parameters (compressive strength, split tensile strength and f...

PS silt mixed soil is a high quality synthetic fill material made of foam material and sludge wasted. This paper indicates according to the test results and the previous studies that: the intensity of light-weight soils is increasing as the grey water ratio increases, and when the gray water ratio reaches a certain value, the strength of the growth rate is not large. Therefore, the research of ...

The uniaxial compression response of manufactured sand mortars proportioned using different water-cement ratio and sand-cement ratio is examined. Pore structure parameters such as porosity, threshold diameter, mean diameter, and total amounts of macropores, as well as shape and size of micropores are quantified by using mercury intrusion porosimetry (MIP) technique. Test results indicate that s...

Xiangming Zhou, Zongjin Li, Mizi Fan, and Huapeng Chen 1 School of Engineering and Design, Brunel University, Uxbridge, Middlesex, United Kingdom UB8 3PH Tel: +44 1895 266 670, Fax: +44 1895 269 782, Email: [email protected]. 2 Department of Civil and Environmental Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, Tel: +852 2358 8751, Fa...

This study presents the result of using melting to recover both industrial sludge slag (the main constituent of which is calcium fluoride) and water works sludge slag as fine aggregate in cement. The main characteristics of both slag and cement mortars were measured to evaluate the feasibility of using slag as aggregate. In this study, the slag replacement ratios were 0, 10, 20, 30, 40, and 50%...

in this work, we studied the effect of carboxylic acid on the rheological properties of a high-alumina cement mortar (ch45) produced by the algerian firm refractal.the investigated properties are setting time, water consumption, electrical conductivity, ph, density and the compressive strength. the results show a setting time of about 200 min for the acid free, 180 min with 0.1 % of carboxylic ...

The prime aim of this study was to investigate the thermal conductivity of concrete using crushed recycled glass as a fine aggregate. Influencing factors on thermal conductivity of concrete are investigated using The Unitherm Model 6000 Guarded Hot Plate Thermal Conductivity Instrument. A total of 36 concrete mixes were produced with different water cement ratios (0.4 and 0.5). Recycled glass w...