The objective of this work is to study the effect of parameters on resistance spot weld of ASS316 material. In order to study the significance of the process parameters i.e. current, electrode force and weld cycles, towards the percentage improvement in material hardness. It is clear from the results that parameters significantly affect both the mean and the variation in the percentage improvem...

Control of the Gas Metal Arc welding process is becoming increasingly sophisticated, due to improvements in technology and a better understanding of the process itself. To effectively conduct research in this area, it is necessary to have equipment that is extremely flexible in both architecture and operation. Experimental power sources and a welding test facility have been developed at the Uni...

The goals of this study were to examine acute lung damage and inflammation, as well as free radical production, caused by welding fumes of different chemical compositions and solubilities. The fumes were from a gas metal arc welding using a mild-steel (GMA-MS) or stainless-steel electrode (GMA-SS) and a manual metal arc welding using a stainless-steel electrode (MMA-SS), which was further separ...

Resistance spot welding is an important manufacturing process in the automotive industry for assembling bodies. The quality and strength of the welds and, by extension, the body is mainly defined by the quality of the weld nuggets. The most effective parameters in this process are sheet material, geometry of electrodes, electrode force, current intensity, welding time and sheet thickness. The p...

A unified comprehensive model was developed to simulate the transport phenomena occurring during the gas metal arc welding process. An interactive coupling between arc plasma; melting of the electrode; droplet formation, detachment, transfer, and impingement onto the workpiece; and weld pool dynamics all were considered. Based on the unified model, a thorough investigation of the plasma arc cha...

The manual process of manufacturing the welding electrode takes more time and work. It also occupies more space for the control panel with the installation of PLC in the welding electrode manufacturing control panel the size of the panel is reduced to the great extent. It has reduced the cost of the panel and has increased the rate of the production. Here the entire process of electrode manufac...

An incrementally coupled electrical – thermal – mechanical model is developed to simulate small scale resistance spot welding (SSRSW) using the finite element method. This numerical model is then employed to study the differences between SSRSW and ‘large scale’ resistance spot welding (LSRSW). The variations in contact area, current distribution, and temperature profile at the workpiece/workpie...

To assess the exposure of welders to thorium-232 (232Th) during tungsten inert gas arc (TIG) welding, airborne concentrations of 232Th in the breathing zone of the welder and background levels were measured. The radioactive concentrations were 1.11 x 10(-2) Bq/m3 during TIG welding of aluminum (TIG/Al), 1.78 x 10(-4) Bq/m3 during TIG welding of stainless steel (TIG/SS), and 1.93 x 10(-1) Bq/m3 ...

This paper investigates the development of weld zone in Resistance Spot Welding (RSW) which focuses on weld nugget and Heat Affected Zone (HAZ). The effects of four factors namely weld current, weld time, electrode force and hold time were studied using a general 2 factorial design augmented by five centre points. The results of the analysis showed that all selected factors except hold time exh...