Abstract The spread of 3D printing in many different fields has become eminent. This paper aims to improve the mechanical properties parts printed by fused deposition modeling technique. Acrylonitrile butadiene styrene (ABS) specimens are with custom parameters. These parameters give a tensile strength that is 86% injection- molded ABS strength, and one best recorded results for 100% infill spe...

In this research, the combustion performance of a novel, composite hybrid rocket fuel grain composed Acrylonitrile Butadiene Styrene (ABS) and Paraffin was investigated to understand effects incorporation novel nanomaterial: gel-like carbon dots (CDs), into paraffin component. ABS grains with straight ports were 3D printed used as molds which base 1 wt% CD-loaded materials casted separately. Fo...

Copper films were grown on (3-Mercaptopropyl)trimethoxysilane (MPTMS), (3-Aminopropyl)triethoxysilane (APTES) and 6-(3-(triethoxysilyl)propylamino)-1,3,5- triazine-2,4-dithiol monosodium (TES) self-assembled monolayers (SAMs) modified acrylonitrile-butadiene-styrene (ABS) substrate via electroless copper plating. The copper films were examined using scanning electron microscopy (SEM) and X-ray ...

Data are presented on the acute toxicity (mortality only) of the thermal degradation products of polymers obtained by two methods of degradation. One system utilized a slowly increasing temperature (5 degrees C/min) and gradual degradation of the polymer with the rats being exposed to degradation products as they were evolved. In this system the more toxic polymers included wool, polypropylene,...

A novel IMRT phantom was designed and fabricated using Acrylonitrile Butadiene Styrene (ABS) plastic. Physical properties of ABS plastic related to radiation interaction and dosimetry were compared with commonly available phantom materials for dose measurements in radiotherapy. The ABS IMRT phantom has provisions to hold various types of detectors such as ion chambers, radiographic/radiochromic...

Abstract The multi-walled carbon nanotubes (MWCNTs) and the poly(acrylonitrile-co-butadiene-co-styrene) (ABS) granulates are dispersed in acetone separately using a magnetic stirrer followed by ultrasonication. Further, both solutions were mixed with stirring Neat-ABS film, 0.25 wt%, 0.5 wt% 1 of MWCNT-ABS nanocomposite films average thickness 140 µm fabricated solution molding petri dish, room...

Acrylonitrile–butadiene–styrene (ABS) is one of the most extensively used engineering polymers. It necessary to study recycling ABS because environmental, economic and energy reasons. In this study, an resin was processed using a torque rheometer at different temperatures for numbers cycles. Pyrolysis gas chromatography mass spectrometry (Py-GC/MS) effects processing parameters on additives. Fo...

Three-dimensional (3D) printing was applied for the fabrication of acrylonitrile butadiene styrene (ABS) framework. Functionalization of the ABS framework was then performed by coating of porous Cu-BTC (BTC = benzene tricarboxylic acid) metal-organic frameworks on it using a step-by-step in-situ growth. The size of the Cu-BTC particles on ABS was ranged from 200 nm to 900 nm. The Cu-BTC/ABS fra...