a modified model has been analytically developed to describe the induction time of an elliptic air bubble in contact with an elliptic hydrophobic oil droplet. the role of hydrophobicity was revealed in the slippage of liquid over the surfaces of bubble and droplet. in this condition, the analytical relationships for pressure distribution and consequently hydrodynamic resistance force through th...

Two-phase flow regimes are affected by conduit position, alignment, geometry, flow direction, physical characteristics, and flow rate of each phase as well as the heat flux toward the boundaries. Due to the importance of two-phase flow, numerous regimes have been identified. The first step in studying micro-bubble formation inside a venturi tube is to recognize the type of flow regimes. In this...

-In storm waterways and at dam outlets, high-velocity supercritical flows are characterized by substantial air bubble entrainment. The entrainment of fine air bubbles and the strong turbulent mixing contribute both to the air-water transfer of volatile gases (e.g. oxygen, nitrogen, VOC). The paper describes new experimental data obtained in a 25 m long channel with a 4 ° slope. The analysis of ...

Air bubbles floating in the bladder dome during transurethral resection of a bladder tumor can interfere with the resection, causing intravesical explosion and increasing the potential risk of tumor cell reimplantation. We describe a simple and effective technique for evacuating air bubbles from the bladder dome using routine resectoscopes. First, the beak of the resectoscope is positioned near...

The hydrodynamics of the implosion and rebound of a small (10 lm diameter) air bubble in water was studied using a three-dimensional direct numerical simulation (DNS). To study this problem, we developed a novel stabilized finite element method (FEM) employing a combination of ghost fluid and level set approaches. This formulation treats both the air and water as compressible fluids. Using this...

The rise and impact of bubbles at an initially flat but deformable liquid-air interface in ultraclean liquid systems are modelled by taking into account the buoyancy force, hydrodynamic drag, inertial added mass effect and drainage of the thin film between the bubble and the interface. The bubble-surface interaction is analyzed using lubrication theory that allows for both bubble and surface de...

Inorganic colloidal particles which are in situ hydrophobized upon adsorption of short-chain amphiphilic molecules can be used as foam stabilizers. In this study, we tailor the microstructure of particle-stabilized wet foams, namely, the foam air content, average bubble size, and bubble size distribution, by changing the composition of the initial colloidal suspension. Wet foams featuring avera...

Safe and efficient exposure of Descemet membrane is the key to success in deep anterior lamellar keratoplasty. Although widely used, the big-bubble technique has the drawback of difficulty in maintaining appropriate needle insertion depth in the corneal stroma, resulting in injected air sometimes escaping to the peripheral cornea without separation of Descemet membrane. We describe a variation ...

"Air-seeding" is a proposed mechanism for the initiation of water stress embolism in dead plant cells. During air-seeding, external air is drawn into the lumen of a dead plant cell through a pore or crack in the cell wall. The resulting bubble may expand to fill the lumen, thus embolizing the cell. The data presented confirm that Sphagnum hyalocysts can embolize by air-seeding when the pressure...

Air bubbles are used in chemical, biochemical, environmental, and food process for improving the heat and mass transfer. Due to the dominance of non-Newtonian liquids used in various process industries, an understanding of bubble rise in rheologically complex liquids has grown to be important. An experimental study of the bubble rise velocity and drag co-efficient at high Reynolds number in non...