Spray drift assessment encompasses classification of the capacity of each sprayer/ technology/setting combination to reduce or avoid the spray drift risk, as well as drift measurement to define buffer zones mandated during pesticide application. Compounding the challenge of these tasks is the great variability of field evaluation results from environmental conditions, spray application technolo...

Spray drying is a process widely used to produce fruit juice powders. In powders, it results with the good quality, low water activity, easier transport and storage. The physicochemical properties of powders produced by spray drying depend on the variables of process and/or operating parameters. In the present review, the principle of spray drying was described. In addition, some factors such a...

The purpose of this Technology Profile is to provide summary information about enclosed spray gun washers that use alternative cleaners in order to raise awareness of their potential to reduce hazardous chemical use and the generation of hazardous waste and air emissions. This profile focuses on the potential benefits of enclosed spray gun washers using alternative cleaners when compared to tra...

A twin surface dielectric barrier discharge is used for the catalyst-enhanced plasma oxidation of 300 ppm n-butane in synthetic air. Plasma-only operation results conversion into CO and CO2. Conversion improved by increasing temperature feed gas, but selectivity shifts to undesired CO. ?-MnO2 as a catalyst deposited on electrodes spray coating with distance 1.5 mm between uncoated grid lines sq...

An efficient and sufficiently power dense air compressor/expander is the key element in a Compressed Air Energy Storage (CAES) approach. Efficiency can be increased by improving the heat transfer between air and its surrounding materials. One effective and practical method to achieve this goal is to use water droplets spray inside the chamber when air is compressing or expanding. In this paper,...

Ceramic Thermal Barrier Coatings (TBCs) on superalloy components are being used successfully in land-based gas turbine and aircraft engines. These coatings are generally made by either air plasma spraying (APS) or electron beam physical vapour deposition (EB-PVD). In general, EB-PVD TBCs have superior durability due to the columnar structure, but they are very expensive compared to APS TBCs. EB...

the aim of the present study was to investigate the influence of nozzle configurations on spray drift and explain the influences using several atomization characteristics (length of spray sheet, spray angle, velocity distribution of flow field, fluctuation of velocity, and droplet size). nozzles manufactured by one company (lechler gmbh, germany) were tested by spraying local tap water in a win...

The use of a scanning Light Detection and Ranging (LIDAR) system to characterize drift during pesticide application is described. The LIDAR system is compared with an ad hoc test bench used to quantify the amount of spray liquid moving beyond the canopy. Two sprayers were used during the field test; a conventional mist blower at two air flow rates (27,507 and 34,959 m3·h(-1)) equipped with two ...

Current Process HVOF thermal spray is widely used for coating critical wear parts like landing gear, bearing races, valves and turbine components. Generally, fully or partially molten metal, composite, or ceramic droplets are propelled from a gun or torch onto the workpiece. Multiple passes are required to build up the coating, since each pass only deposits ~ 0.0002 in 0.0005 in thickness of ma...

OBJECTIVE To investigate the influence of maintenance spray on resin bonding to dentin. MATERIALS AND METHODS The crown of extracted, caries-free human molars was transversally sectioned with a model trimmer to prepare the dentin surfaces from mid-coronal sound dentin, and then uniformly abraded with #600 silicon carbide paper. The dentin surfaces were randomly divided into three groups: oil-...