aisi 4340 steel is one of the super strong steels that can be selected for different applications. by designing theproper cycles of heat treatment, the optimum microstructure and properties of this steel can be achieved. in thisstudy, different heat treatment cycles were introduced to achieve the optimum microstructure and improve themechanical and magnetic properties of aisi 4340 steel. the re...

Deep cold rolling (DCR) and low plasticity burnishing (LPB) process are cold working processes, which easily produce a smooth and work-hardened surface by plastic deformation of surface irregularities. The present study focuses on the surface roughness and surface hardness aspects of AISI 4140 work material, using fractional factorial design of experiments. The assessment of the surface integri...

In order to optimize the hot forming process of tool steels, further improvement of flow stress prediction and additional knowledge on hot deformability, especially at lower and upper limits of the hot working range, are required. The hot working ranges for these steels are very narrow as a consequence of the role of alloying elements, which form carbides. Carbides improve tool steel’s hardenab...

the development of nano/ultrafine bainitic structure in aisi 52100 steel was the goal of this study. for this purpose,the aisi 52100 the specimens were austenitized at 1050 °c for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. the austempered samples were characterized using field emissionscanning electron microscopy (fesem), x-ray diffraction (xrd...

Laser beam welding (LBW) is one of the most important manufacturing processes used for joining of materials. It is also a remarkably complicated, nonlinear operation involving extremely high temperatures. Since its invention more than two decades ago, laser beam welding has been more of an art than a science. Laser welding of austenitic stainless steel AISI 304 the candidate material of this re...

Thanks to the collaboration between two laboratories, we present different techniques to measure thermal diffusivity. A brief description of any technique both in the experimental layout and in the processing algorithms is given. Results obtained on samples cut from the same block of stainless steel AISI 304, are reported. Uncertainty evaluation of any measurement is reported as well.

Neural Network Modeling and Particle Swarm Optimization (PSO) of Process Parameters in Pulsed Laser Micromachining of Hardened AISI H13 Steel J. Ciurana a; G. Arias b; T. Ozel c a Department of Mechanical Engineering and Industrial Construction, Universitat de Girona, Spain b Department of Mechanical Engineering, Universitat Politècnica de Catalunya, Spain c Department of Industrial and Systems...

The monotonic and cyclic deformation behavior of ultrafine-grained metastable austenitic steel AISI 304L, produced by severe plastic deformation, was investigated. Under monotonic loading, the martensitic phase transformation in the ultrafine-grained state is strongly favored. Under cyclic loading, the martensitic transformation behavior is similar to the coarse-grained condition, but the cycli...

The effect of an addition of 0.37 Wt % Won the overall transformation rate of the austenitepearlite reaction in a eutectoid steel is examined. Pearlite growth rates and interlamerllar spacing are measured as a function of transformation temperatures. Tungesten raises the Ael temperature, for most transformation temperatures, decreases the overall reaction rate, the growth rate and the interlame...

silica refractory bricks are used especially in the metallurgical industries, due to desirable properties suchas high melting point, rigidity, and high temperatures strength. in this research, different amount of sicwere added to silica refractory containing different binders such as borax, boric acid, calcium nitride,sodium tri poly phosphate, sodium hexa meta phosphate (shmp) and lime. physic...