Stainless-steel has become a widely preferred material type in the marine, aerospace, sanitary, industrial equipment, and construction industries due to its superior corrosion resistance, high mechanic properties, strength, formability, thermal electrical conductivity. In this study, multi-objective optimization method based on grey relational analysis was employed optimize fiber laser-cutting ...

Corrosion is one of the major problems in the industry especially on machinery since it weakens the structure of the machinery part and causes the mechanical failure. This will stop the production and increase the maintenance cost. In this study, the corrosion behaviour of gas nitriding on a screw press machine shaft made from AISI 4140 steel was investigated. Pitting corrosion was identified a...

A high quality joint between tool steel and stainless steel alloys is hard to achieve with the conventional welding process. In this study, a new process of joining semi-solid AISI D2 tool steel and AISI 304 stainless steel using a partial remelting method is proposed. Metallographic analysis and Vickers hardness tests were performed. The results obtained from investigating the basic geometries...

INTRODUCTION Contaminated sponges might lead to cross-contamination in kitchens since they can transfer microorganisms to surfaces where microorganisms can survive for hours or days and contaminate food. The main objective of this study was to evaluate the transfer and the survival of bacteria from kitchen sponges to surfaces of AISI 316 stainless steel and polyethylene. METHODOLOGY Twenty-fo...

This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...

Objectives: The purpose of this study was to analyze, with the aid of scanning electron microscopy (SEM), the chemical and structural changes in metal brackets subjected to an in vitro biodegradation process. Methods: The sample was divided into three groups according to brackets commercial brand names, i.e., Group A = Dyna-Lock, 3M/Unitek (AISI 303) and Group B = LG standard edgewise, American...

Michael Ghil, Mickaël D. Chekroun and Dmitri Kondrashov Dept. of Atmospheric & Oceanic Sciences and Institute of Geophysics and Planetary Physics, University of California, Los Angeles, CA 603 Charles E. Young Dr., East, 3845 Slichter Hall Los Angeles, CA 90095-1567 Ghil phone: (310) 825-1038 fax: (310) 206-5219 email:[email protected] Chekroun phone: (310) 825-1038 fax: (310) 206-5219 email:...

Dimensional distortion occurs due to the thermal and transformation stresses formed during the heat treatment processes. Taguchi and Factorial design of experiment concepts were applied to optimize the operating variables involved in the gas carburising and induction hardening processes so as to minimize the geometrical distortions. Experimental data obtained for the materials EN353, EN351, AIS...

behaviors of stress corrosion cracking (scc)in martensitic stainless steel(aisi 420) and low carbon austenitic stainless steel (aisi 316l) have been compared under different conditions of temperature, environment (mgcl2), and strain rate. the results show that decreasing strain rate has detrimental effect on mechanical properties of both steels, including their strength and ductility. fractogra...