Finding an alternate solution for supplanting the existing conventional lubricant in machining is a challenge. This work narrows search down to use of nano-cutting fluids, as they exhibit excellent properties such high thermal conductivity and good lubricity. A technical analysis performance hybrid fluids end milling AA6082 aluminium alloy constrained condition presented. Alumina carbon nanotub...

In-plane permeability of small area (100 × 50 mm) alumina fiber woven fabrics grafted with aligned carbon nanotubes (CNT) was quantified by placing them in series a glass mat known during flow experiment. The methodology first validated on reference textile. Permeability values matched those obtained direct method within margin ±15%. Permeabilities radial-aligned (short CNT, SCNT) and so-called...

PURPOSE The purpose of the present study was to evaluate the flexural strength of the joint between glass-infiltrated alumina frames and the experimental adjusting agent (MA modifier) that contains alumina and magnesia. METHODS A commercially available adjusting agent (Optimizer), a slurry of alumina powder (Alumina modifier), and a bulk specimen (joint-free alumina) were used as controls. Be...

in the present investigation surface modification of silica nanoparticles by alumina was carried out by sol-gel process. fourier transform infrared (ftir) and x-ray fluorescence (xrf) confirmed the synthesis of silica and the surface modification as alumina is anchored to silica surface. field emission scanning electron microscopy (fesem) and transmission electron microscopy (tem) investigation...

Porous alumina films had been fabricated by anodizing from aluminum films after an electropolishing procedure. Alumina stripes without pores can be distinguished on the surface of the porous alumina films. The width of the alumina stripes increases proportionally with the anodizing voltage. And the pores tend to be initiated close to the alumina stripes. These phenomena can be ascribed to the e...

Alumina is one of the most widely used adsorbent for removal of dissolved pollutants from waste water. Various chemical species, especially ions, are known to be adsorbed onto alumina. On the other hand, alumina is a typical support for catalysts. Many kinds of metal supported catalysts are prepared using alumina as their support. These two roles of alumina, i.e., as adsorbent and support, are ...

Alumina nanofibers were prepared by a technique that combined the sol-gel and electrospinning methods. The solution to be electrospun was prepared by mixing aluminum isopropoxide (AIP) in ethanol, which was then refluxed in the presence of an acid catalyst and polyvinylpyrolidone (PVP) in ethanol. The characterization results showed that alumina nanofibers with diameters in the range of 102 to ...