Electrophoretic process was applied to the deposition of carbon nanotubes on the surface of carbon fabrics in order to enhance the properties of CNT/carbon fabric hybrid composites. Carbon fabrics were modified by two methods: Cu deposition by cathodic method and Cu coating by thermal vaporization method. CNTs were modified by PEI and oxidation treatment. The effects of carbon fabric and CNTs m...

Carbon nanotubes (CNTs ) are considered to be one of the novel reinforcement for developing advanced nanocomposites due to their outstanding thermo-mechanical properties. Multi-walled carbon nanotubes (MWCNTs ) are developed by arc discharge method. To enhance the dispersion of CNTs in polymer matrix, CNTs are modified with chemical treatment and processed by ultrasonication process. Surface ch...

Abstract—This paper presents the electromagnetic interference (EMI) shielding effectiveness of rice husk and carbon nanotubes (RHCNTs) composites in the X-band region (8.2-12.4 GHz). The difference weight ratio of carbon nanotubes (CNTs) were mix with the rice husk. The rectangular waveguide technique was used to measure the complex permittivity of the RHCNTs composites materials. The complex p...

In this research, a novel method to decrease micro-residual stresses of fibrous composites by adding carbon nanotubes (CNTs) is proposed in detail. The negative coefficient of thermal expansion and the high young’s modulus of CNTs can be utilized to counterbalance the process induced residual stresses in composites. To this end, first, the effects of adding CNTs to the matrix of fibrous composi...

Abstract This paper aims to study the mechanical properties of hybrid polymer composites and addition primary secondary fillers nano-aluminum oxide nanographene Kenaf epoxy composites. The vacuum bagging method was used fabricate advantage using is reduce blowholes. weight ratio fiber 50%–60%, matrix 40%, 0%–6%, 0%–3% considered. Mechanical like Tensile strength, Young’s modulus elongation, fle...

in this study, ultrafine grained 2024 al alloy based b4c particles reinforced composite was produced by mechanical milling and hot extrusion. mechanical milling was used to synthesize the nanostructured al2024 in attrition mill under argon atmosphere up to 50h. a similar process was used to produce al2024-5%wt. b4c composite powder. to produce trimodal composites, milled powders were combined w...

We synthesized Ag nanoparticle-decorated multilayered graphene nanosheets (Ag-graphene) from graphite nanoplatelets and silver nitrate through 90-100 s of microwave exposure, without the use of any mineral acids or harsh reducing agents. Fe nanoparticle-decorated carbon nanotubes (Fe-CNTs) were grown on polypyrrole (PPy) deposited on woven Kevlar fibre (WKF), using ferrocene as a catalyst, unde...

The excellent mechanical properties of carbon nanotubes (CNTs) make them the ideal reinforcements for high performance composites. The misalignment and waviness of CNTs within composites are two major issues that limit the reinforcing efficiency. We report an effective method to increase the strength and stiffness of high volume fraction, aligned CNT composites by reducing CNT waviness using a ...

This review outlines the state of art, processing techniques, and mechanical testing methods zirconia (ZrO2)-based composites reinforced by carbon nanotubes (CNTs). The use CNTs as a secondary phase in matrix is motivated their outstanding crack self-healing ability, possibility to tailor desired nano-structural properties, exceptional wear behavior. Therefore, detailed investigation into CNT f...