In this paper, aerodynamic blade design optimization for a transonic axial compressor has demonstrated by using an evolutionary-algorithm-based high-fidelity design optimization tool. The present method uses a three-dimensional Navier-Stokes solver named TRAF3D for aerodynamic analysis to represent flow fields accurately and the realcoded ARGA for efficient and robust design optimization. The p...

The unstable flow with rotating-stall-like (RS) effects in a rotor-cascade of an axial compressor was numerically investigated. The RS was captured with the reduction in mass flow rate and increasing of exit static pressure with respect to design operating condition of the single rotor. The oscillatory velocity traces during the stall propagation showed that the RS vortices repeat periodically,...

The air-injection as an active flow stabilizing techniques, were numerically examined in current work, during the aerodynamic behavior and the characteristics of an axial compressor. At first, in design condition the characteristic curve was numerically captured for a specified test compressor. The computed results showed good agreements with those obtained from the experiments, to validate the...

Results of a high-speed 10-stage axial-flow compressor test involving overall compressor and individual stage performance while stalling and operating in quasi-steady rotating stall are described. Test procedures and data acquisition methods used to obtain the dynamic stalling and quasi-steady in-stall data are explained. Unstalled and in-stall time-averaged data obtained from the compressor op...

Axial flow compressors are subjected to demands for ever-increasing levels of pressure ratio at a compression efficiency that augments the overall cycle efficiency. However, unstable flow may develop in the compressor, which can lead to a stall or surge and subsequently to gas turbine failure resulting in significant downtime and cost to repair. To protect against these potential aerodynamic in...

Axial flow compressors are required to operate over a wide range of mass flow rate and rotational speeds at high efficiency in industrial gas turbines. However, the useful range of operation of the axial compressor is limited by the onset of two instabilities known as surge and rotating stall. To resolve these problems, variable stator blades or VGVs are considered by optimising the blade setti...

New rotor blades are to be fabricated for the 24 foot diameter, 3-stage axial compressor which provides airflow in the 11by 11-Foot Transonic Wind Tunnel Facility at NASA Ames Research Center in Moffett Field, California. This presents an opportunity to increase the peak Mach number capability of the tunnel by redesigning the compressor for increased pressure ratio. Simulations of the existing ...