In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of a thermosyphon with a copper tube having 25 and 32 mm inside and outside diameters. Distilled water was used as the wor...

In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of the thermosyphon. The experimental boiling and condensation heat transfer coefficients inside the thermosyphon were com...

In this paper the changes in the heat capacity of cooling towers has been investigated as a result of injecting combustion products of boilers. In the tower, the air is re-heated through mixing with hot flue gas after passing through the heat exchangers. As a result of this process, the draft of the cooling tower is increased. The additional produced draft depends on the ambient temperature and...

In this paper the changes in the heat capacity of cooling towers has been investigated as a result of injecting combustion products of boilers. In the tower, the air is re-heated through mixing with hot flue gas after passing through the heat exchangers. As a result of this process, the draft of the cooling tower is increased. The additional produced draft depends on the ambient temperature and...

obtaining temperature distribution data of slabs under rolling is essential as the mechanical and metallurgical properties of the metal under this process vary with temperature. using the control volume method, a mathematical model is employed in this study to predict slab temperature in the hot roll process at mobarakeh steel company. the effects of different parameters including the heat resu...

This article discusses the existing calculation of heat for a coal-fired hot-blast furnace. By utilizing the standard method of heat calculation for boilers, considering the relation between the theoretical combustion temperature and the excess air coefficient of the boiler, combining some operational parameters of a coal-fired powder hot-blast furnace, the heat calculation of iron ore concentr...

In this work, the characteristics of flow and heat transfer of a fluid containing nano particles of aluminum oxide with the water volume fraction (0.1-0.2-0.3)(V/V) percent of the reports. The overall heat transfer coefficient, heat transfer and the average heat transfer fluid containing nano water - aluminum oxide in a horizontal double pipe counter flow heat exchanger under turbulent flow con...

basic understanding of the process of coolant heat transfer inside an engine is an indispensable prerequisite to devise an infallible cooling strategy. coolant flow and its heat transfer affect the cooling efficiency, thermal load of heated components, and thermal efficiency of a diesel engine. an efficient approach to studying cooling system for diesel engine is a 3d computational fluid dynami...

Ash fouling has been an important factor in reducing the heat transfer efficiency and safety of coal-fired power plant boilers. Scientific accurate prediction ash surfaces is basis formulating a reasonable soot blowing strategy to improve energy efficiency. This study presented comprehensive approach dynamic At first, cleanliness used reflect level surfaces. Then, model proposed predict deposit...

bubble columns are gas- liquid contactors that are widely used in chemical and bio- chemical industries. high mixing that result in high heat and mass transfer rates are amongst their advantages. heat transfer in a bubble column having a bundle of heaters investigated and the variation of heat transfer coefficient with variation in heaters pitch to diameter ratios in a bundle of heaters reporte...