This article presents 755 groups splitting tensile strength tests data of concrete with manufactured sand (MSC) in different curing age ranged from 1 day to 388 days related to the research article "Experimental study on tensile strength development of concrete with manufactured sand" (Zhao et al., 2017) [1]. These data were used to evaluate the precision of the prediction formulas of tensile s...

Biomass size reduction is an important step in biomass densification and this article reviews reduction studies. Hammermilling technology had the advantage of low maintenance over other methods including crushing, shearing and rollermilling. A review of equipment design parameters showed that hammermill tip speed, power requirements, grinding rate, screen size, and clearance affect performance ...

The calibrated-leak balloon catheter, used for the selective catheterization of intracranial arteries, originally incorporated a silicone microballoon at its tip [1]. Latex balloons have now proven superior in elasticity and tensile strength when compared with balloons made of silicone [2] . Consequently, most workers construct the calibrated-leak balloon catheter by gluing a leaking latex micr...

A method of testing the tensile strength of the porcelain-gold bond has been developed. Tensile strengths of the bond are improved primarily by the formation of an oxide layer on the gold before baking the porcelain and not by the degree of gross surface roughness. The oxide layer may act either as a transition ayer or i t may create microsurface roughness. The gross surface roughness probably ...

This paper attempts to investigate the influence of the microstructure and mechanical property changes on sand casting and permanent die casting alloys by grain refinement, modification combined action of both (Al– 3Ti–1B + Al–10Sr) and without grain refinement and modification effect. The microstructures of the castings are studied by optical microscopes. The microstructure and mechanical prop...

Mg-9Al-1Si-1SiC composites with various initial microstructures prior to equal channel angular pressing (ECAP) were obtained by different pre-treatments (without and with homogenization treatment), and the resultant grain size, second phase and tensile properties of ECAPed composites were reported. The ECAPed composite with homogenization treatment (HT) exhibited finer grain size, higher fracti...

Self assembling wire networks typically evolve to minimize the resistance across electrical contacts which are frequently used in a manner comparable to Hebbian learning. In this work, we demonstrate that electrical fields can also be used to cause an increase in the resistance of the wire network. We show that if such a wire is exposed to a transverse electric field, the wire is deformed in a ...

This work presents the effect of various wear environments like 20% soil & 80% sand and 40% soil & 60% sand on as received and carburized mild steel sample at different load like 75N, 200N & 375N and at different tempering temperature like 200oC, 250oC & 300oC. The mild steel sample was carburized at 950oC. The heat treatment after carburization has been acknowledge that at some instant it impr...

one of the most important parameters used for determining the performance of tunnel boring machines (tbms) is their penetration rate. the parameters affecting the penetration rate can be divided in two categories. the first category is the controllable parameters such as the tbm technical characteristics, and type and geometry of the tunnel, and the second one is the uncontrollable parameters s...

during the past two decades the use of lignocellouse fibers in reinforcing composites has attracted much research activities. in the present work, date palm fiber was used for production of composites compatible withliving environment. the fibers were pre-treated chemically to remove impurities. in order to verify and compare the effectiveness of the pretreatment methods, lignin, ash, moisture ...