Metallic composite coatings with ceramic particles can be used to improve the mechanical and corrosion properties of steel. In the present research, Ni-ZrO2-TiO2 composite coating was fabricated on AISI 430 stainless steel through the electrodeposition method. The effect of the current density of electroplating (15, 17, 20, and 23 mA.cm-2)was investigated on the...

Osseointegration has been the concern of implantology for many years. Researchers have used various ceramic coatings for this purpose; however, piezoelectric ceramics (e.g., barium titanate [BTO]) are a novel field of interest. In this regard, BTO (BaTiO3) coating was fabricated by electrophoretic deposition on Ti6Al4V medical alloy, using sol-gel-synthesized nanometer BTO powder. Structure and...

Modern gas turbine hot sections need to be protected from elevated temperature and damaging environments. This protection starts as a typically two layer coating system, the base layer or bond coat (BC) acts as a corrosion barrier and a kind of buffer for the thermal mismatch between the base material and the second top thermally protective layer or Thermal Barrier Coating (TBC). The BC is norm...

A thermal and hydrothermal stable mesoporous ceramic acid (mCA) was synthesized by uniform coating of a WZrO(x) layer onto the internal surface of extra-large mesoporous silica (EP-FDU-12). Its ordered mesoporous structure and strong Brönsted acid sites display excellent thermal (1000 °C, air, 5 h) and hydrothermal (water steam, 300 °C, 24 h) stability.

OBJECTIVES This study was undertaken to characterize the mechanical response of bare (as-received) and single-layer ceramized zirconia abutments with both internal and external connections that have been developed to enhanced aesthetic restorations. MATERIAL AND METHODS Sixteen zirconia implant abutments (ZiReal Post®, Biomet 3i, USA) with internal and external connections have been analyzed....

This is a review of acid aluminum phosphate for the binding and coating of materials. The acid aluminum phosphate in the form of a solution obtained by dissolving aluminum hydroxide in phosphoric acid, with a P/Al molar ratio of 23, is effective for the binding of fibrous or particulate materials. Porous ceramic articles are made using this binder by wet forming, followed by heat treatment. The...

Lightweight porous ceramic materials that can recover their shapes after mechanical deformation have numerous applications. However, these types of materials tend to be highly fragile and often crack when compressed. Here, we report on the fabrication and characterization of highly porous, freestanding composites of hexagonal boron nitride (h-BN) and single-walled carbon nanotubes (SWCNTs) of d...

PURPOSE The purpose of this study was to evaluate and compare the effects of different surface pretreatment techniques on the surface roughness and shear bond strength of a new self-adhering flowable composite resin for use with lithium disilicate-reinforced CAD/CAM ceramic material. MATERIALS AND METHODS A total of one hundred thirty lithium disilicate CAD/CAM ceramic plates with dimensions ...

OBJECTIVE This in vitro study aimed to evaluate the influence of different surface treatments, 3 luting agents and thermocycling on microtensile bond strength (µTBS) to zirconia ceramic. MATERIAL AND METHODS A total of 18 blocks (5x5x4 mm) were fabricated from zirconia ceramic (ICE Zirkonia) and duplicated into composite blocks (Alphadent). Ceramic blocks were divided into 3 groups (n=6) acco...

BACKGROUND AND PURPOSE Cementless total hip arthroplasty is currently favored by many orthopedic surgeons. The design of the porous surface is critically important for long-term fixation. We examined the clinical and radiographic outcome of the cementless titanium hip implant with a bottom coating of apatite-wollastonite containing bioactive glass ceramic. METHODS We retrospectively reviewed ...