Increasing the concrete alkali content from 0.6% to 1.25% of Na2Oe of the cement mass by adding NaOH to the mixture water has harmful effects on most mechanical properties (compressive, splitting, direct tensile, and flexure strengths) of concrete made with a water-tocement (w/c) ratio of 0.41 and limestone aggregates not susceptible to alkali–silica reaction (ASR), however not on the elasticit...

Colloidal chemically converted graphene sheets (CCGs) are able to contact with each other to form stable self-assembled stacked-CCGs via salt "invasion", which can serve as powerful building blocks for capturing double-stranded DNA.

fiber reinforced concrete (frc) has been widely used due to its advantages over plain concrete such as high energy absorption, post cracking behaviour, flexural and impact strength and arresting shrinkage cracks. but there is a weak zone between fibers and paste in fiber reinforced concretes and this weak zone is full of porosity, especially in hybrid fiber reinforced concretes. so it is necess...

Densely aligned CoS2 nanowires (NWs) on chemically durable stainless steel fibers felt (SSF) substates were synthesized by thermal sulfuring Co3O4 NWs, which oxidized from hydrothermal Co(OH)y(CO3)(1?0.5y)·nH2O NWs precursors. The effect of sulfuration temperature the composition, morphology, and HER performance products was studied in detail. results show that high purity together with enlarge...

a Faculty of Civil Engineering and Architecture, Zhejiang University of Technology, Hangzhou 310014, PR 5 China 6 b Concrete Durability Group, Department of Civil and Environmental Engineering, Imperial College London, 7 SW7 2AZ, UK 8 9 ABSTRACT 10 11 In this study, the influence of the aggregate-cement paste interfacial transition zone (ITZ) on the steady-state 12 chloride diffusivity of morta...

A study of the bond characteristics of carbonate aggregates was made by applyirig shear stresses to 1/8-inch thick slices of highway concrete. It was found that aggregates can be classified as strong, indeterminate, and weak relative to the matrix of the concrete, when accurate lithological cataloging of the aggregates from the source quarry section is made prior to the shear study. Definite cl...

The aim of the study was to generate rules for the prediction of the chloride resistance of concrete modified with high calcium fly ash using machine learning methods. The rapid chloride permeability test, according to the Nordtest Method Build 492, was used for determining the chloride ions' penetration in concrete containing high calcium fly ash (HCFA) for partial replacement of Portland ceme...

Polymer concrete, a composite material in which the binding material is some type of polymer, is being used more widely in the construction industry. Polymer concretes can also contain steel reinforcing rebars; therefore, the rate of adhesion between polymer concrete and reinforcing steel must be determined. Our study investigated the extent and behaviour of adhesion in the case of reinforcing ...

In the production of cement and concrete, mechanical durable properties are essential, along with reasonable cost sustainability. This study aimed to apply an evaluation procedure level sustainability mixtures high-performance concretes (HPC) various eco-friendly supplementary cementitious materials (SCM). The major (SCMs), namely, volcanic pumice pozzolan (VPP), Class C F fly ash, ground granu...