We attempt to meet the general design requirements for high-performance supercapacitor electrodes by combining the strategies of lightweight substrate, porous nanostructure design, and conductivity modification. We fabricate a new type of 3D porous and thin graphite foams (GF) and use as the light and conductive substrates for the growth of metal oxide core/shell nanowire arrays to form integra...

Cobalt oxide (Co3O4) was homogeneously coated on multiwalled carbon nanotube through a simple chemical deposition method and employed in supercapacitor electrodes. SEM image indicated the uniform distribution of Co3O4 nanoparticles on the surface of the multiwalled carbon nanotube. A maximum specific capacitance of 273 Fg(-1) was obtained at the charge-discharge current density of 0.5 Ag(-1). A...

To realize the various functionalities and maximize the structural advantages, hollow particles with multiple compositions and complex structures are highly desirable. However, the development of a convenient and scalable method for the synthesis of such multi-compositionally complex hollow structures remains a big challenge. Herein, we report an efficient and universal strategy to fabricate a ...

Three-dimensional (3D) graphene-based composite materials have attracted increasing attention, owing to their specific surface area, high conductivity and electronic interactions. Here, we report a convenient route to fabricate a 3D Co3O4/Graphene Hydrogel (CGH) composite as an electrode material for supercapacitors. Utilizing the gelation of a graphene oxide dispersion enables the anchoring of...

Transition metal oxides have been suggested as innovative, high-energy electrode materials for lithium-ion batteries because their electrochemical conversion reactions can transfer two to six electrons. However, nano-sized transition metal oxides, especially Co3O4, exhibit drastic capacity decay during discharge/charge cycling, which hinders their practical use in lithium-ion batteries. Herein,...

The functionality or oxidation state of cobalt within a silica matrix can be tailored through the use of cationic surfactants and their halide counter ions during the sol-gel synthesis. Simply by adding surfactant we could significantly increase the amount of cobalt existing as Co3O4 within the silica from 44% to 77%, without varying the cobalt precursor concentration. However, once the surfact...

in this paper, an energetic coordination compound namely pentamminenitratocobalt(iii) nitrate, [co(nh3)5(no3)](no3)2, was used as a new precursor for the preparation of co3o4 nanoparticles. the results showed that the complex is easily decomposed into the co3o4 nanoparticles at low temperature (200 °c) without employing a surfactant or solvent and any complicated equipment. the product was char...

α-MnO2 nanotubes-supported Co3O4 (Co3O4/MnO2) and its carbon nanotubes (CNTs)-hybrids (Co3O4/MnO2-CNTs) have been successfully developed through a facile two-pot precipitation reaction and hydrothermal process, which exhibit the superior bi-functional catalytic activity for both ORR and OER. The high performance is believed to be induced by the hybrid effect among MnO2 nanotubes, hollow Co3O4 a...

Large Li2O2 aggregations can produce high-capacity of lithium oxygen (Li-O2) batteries, but the larger ones usually lead to less-efficient contact between Li2O2 and electrode materials. Herein, a hierarchical cathode architecture based on different discharge characteristics of α-MnO2 and Co3O4 is constructed, which can enable the embedded growth of large Li2O2 aggregations to solve this problem...

In the present work, a novel photocatalytic fuel cell (PFC) system involving a dual heterojunction photoelectrodes, viz. polyaniline/TiO2 nanotubes (PANI/TiO2 NTs) photoanode and CuO/Co3O4 nanorods (CuO/Co3O4 NRs) photocathode, has been designed. Compared to TiO2 NTs electrode of PFC, the present heterojunction design not only enhances the visible light absorption but also offers the higher eff...