In the present study, a conversion layer mainly composed by cerium oxide was prepared by means of a novel ultrasound-assisted coating process. The formation of a conversion layer on top of the Mg alloy provides physical barrier properties improving the corrosion protection. In addition, the incorporation of cerium oxide within the coating enables the formation of a protective layer on the pores...

A 0.5 μm thick layer of rhodium was deposited on the CMSX 4 superalloy by the electroplating method. The rhodium-coated superalloy was hafnized and aluminized or only aluminized using the Chemical vapour deposition method. A comparison was made of the microstructure, phase composition, and oxidation resistance of three aluminide coatings: nonmodified (a), rhodium-modified (b), and rhodiumand ha...

This paper considers the explicit solutions of free-edge stresses near circumferential cracks in surface coatings of circular torsion bars and their application in determining the progressive cracking density in the coating layers. The problem was formulated within the framework of linear elastic fracture mechanics (LEFM). The free-edge stresses near crack tip and the shear stresses in the cros...

Three layered pellets of budesonide were prepared for colon delivery by the extrusion-spheronization method. The coatings consisted of hydroxypropylmethyl cellulose (HPMC) (as barrier layer), Eudragit E (as rate controlling layer) and hydroxypropylmethyl cellulose acetate succinate (HPMC AS) (as enteric layer). The rate controlling layer was further modified using various pore formers. Dissolut...

An AlCoCrCuFeNi high-entropy alloy (HEA) coating was fabricated on a pure magnesium substrate using a two-step method, involving plasma spray processing and laser re-melting. After laser re-melting, the microporosity present in the as-sprayed coating was eliminated, and a dense surface layer was obtained. The microstructure of the laser-remelted layer exhibits an epitaxial growth of columnar de...

these days, most of the marine structures which are constructed and used in persian gulf, are made of st37 steel. due to oil and gas sources excavated, the number of these structures is constantly increasing. on the other hand, these types of structures are exposed to corrosive environments and it is seriously critical for these structures to be used for many years. coal tar epoxy (trade name),...

A novel protocol for precisely coating individual multiwall carbon nanotubes (MWCNTs) with an ultrathin layer of polypyrrole was developed. The nanocoated MWCNTs were successfully prepared by in situ chemical deposition of polypyrrole in an aqueous suspension of MWCNTs. The coating layer was very uniform and the thickness of the layer was determined by controlling the monomer concentration used...

In the present research, to form niobium carbide coating on the surface of AISI L2 steel Thermo-Reactive Deposition method (TRD) in a molten bath was used. Niobium carbide coating treatment was carried out at 1173 K, 1273 K, and 1373 K for 2, 4, and 8 hours. The molten bath contained 20wt.% borax (Na2B4O7), 5 wt.% boric acid (B2O3), and 75 wt.% ferro-niobium. The presence and properties of...

Terahertz pulsed imaging (TPI) is a recent and nondestructive technique to quantify coating thickness of pharmaceutical tablet film coatings. In this study, TPI is used for the first time to quantify the progress of an active coating process. The dosage form consisted of a push-pull osmotic system comprising a two-layer tablet core with a functional film coating and a laser drilled hole. On top...

Modeling of macro-bend losses for single mode fibers with multiple cladding or coating layers is presented. Macro-bend losses for standard single mode fibers (SMF28) are investigated theoretically and experimentally, showing that the inner primary coating layer of SMF28 has a significant impact on the bend losses and most of the radiation field is absorbed in the inner primary coating layer of ...