In this study different sized sustained-release coated pellets (6, 2.5 and 1 mm in diameter) were investigated using terahertz pulsed imaging (TPI). Ten pellets from each batch of metoprolol succinate layered sugar starter cores coated with a 75:25 (w/w) polymer blend of Kollicoat SR and Kollicoat IR (approximate coating thickness of 60 μm, according to the weight gain) were mapped individually...

In this research, tribological characteristics of Ni-P electroless coating and double-layered Ni-P/Ni-B electroless coating were studied. For this purpose, Ni-P electroless coating with 25 μm thickness was initially applied to the surface of steel Ck45 samples; then, a double-layered Ni-P/Ni-B electroless coating, including inner layer of Ni-P with 15 μm thickness and outer layer of Ni-B with 1...

Hydroxyapatite (HAP) is the most suitable biocompatible material for bone implant coatings; its brittleness, however, is a major obstacle, and the reason why research focuses on creating composites with biopolymers. Organosolv lignin (Lig) is used for the production of composite coatings, and these composites were examined in this study. Titanium substrate is a key biomedical material due to it...

In this study, in order to achieve effective coating of the homogeneous titanium dioxide (TiO2) thin film, UV irradiation pre-treatment was carried out to activate PC surfaces before coating. Sol-gel-based nanocrystalline TiO2 thin films were prepared by employing tetrabutyl-titanate as a precursor. Nanocrystalline TiO2 thin films were deposited by sol-gel spin coating on the treated substrates...

In this research, inorganic material type and content influence on coating of commercially available polypropylene (PP) separator were studied for improving its performance and safety as lithium ion battery separator. Heat-resistant nanopowders of Al2O3, SiO2 and ZrO2 were coated using polyvinylidene fluoride (PVDF) binder. Coating effects on the separators morphology, wettability, high tempera...

Extraordinary water-repelling properties of superhydrophobic surfaces make them novel candidates for a great variety of potential applications. A general approach to achieve superhydrophobicity requires low-energy coating on the surface and roughness on nano- and micrometre scale. However, typical construction of superhydrophobic surfaces with micro-nano structure through top-down fabrication i...

The implications arising from the distribution of offset ink components in a paper coating structure are presented. The work focuses on two mechanisms causing differential distribution of ink constituents, namely (a) adsorption chromatography, resulting from coating pigment chemistry and morphology variables, and (b) latex-oil diffusional interaction. Adsorption chromatographic fractionation an...

in the past 30 years, electroless nickel (en) plating has grown to such proportions that these coatingsand their applications are now found underground, in outer space, and in a myriad of areas inbetween. moreover, in order to further improve the mechanical and tribological properties of thenickel-phosphorous (ni-p) coatings, ni-p/ptfe composite coatings can be obtained, which provideseven grea...

osseointegration has been the concern of implantology for many years. researchers have used various ceramic coatings for this purpose; however, piezoelectric ceramics (e.g., barium titanate [bto]) are a novel fi eld of interest. in this regard, bto (batio3 , bto) coating was fabricated by electrophoretic deposition on ti6al4v medical alloy, using sol-gel-synthesized nanometer bto powder. struct...

The hydrothermal-electrochemical method is best suited for producing homogeneous apatite coatings on electro-conductive materials with complicated shape, such as the mesh. This study was undertaken to examine the effect of the apatite coating prepared by this coating method on cell adhesion, proliferation, and differentiation of MC3T3-E1 cells in culture. The cells attached and spread well on t...