Cold rolling of austenitic stainless steel results in increase of residual stresses, hardness, and tensile strength and dislocation density. We have studied the response of eddy current impedance to austenitic change, hardness and its lift off phase in stainless steels during cold reductions. A series of samples of austenitic stainless steel alloys were cold rolled and found that only percentag...

The effect of cold rolling on the microstructure and mechanical properties of an Al- and C-containing CoCrFeNiMn-type high-entropy alloy was reported. The alloy with a chemical composition (at %) of (20-23) Co, Cr, Fe, and Ni; 8.82 Mn; 3.37 Al; and 0.69 C was produced by self-propagating high-temperature synthesis with subsequent induction. In the initial as-cast condition the alloy had an face...

It is well known that tandem cold rolling is one of the most widely used processes in the manufacture of various sheet products with high accuracy and production rate. This paper deals with an optimization problem for tandem cold rolling. A genetic algorithm is developed to optimize the reduction schedules from the power consumption and damage evolution points of view. Damage-coupled finite ele...

The mechanical properties of GH4169 alloy sheet after cold rolling (at 0%, 10%, 30%, 50% and 70%) and solid solution were investigated. The textures and Taylor factors were characterized using electron backscattering diffraction (EBSD). The fractions of δ phase were measured by X-ray diffraction. The contributions of δ phase, grain size, texture, and work hardening on the mechanical properties ...

In this paper an analytical model for cold rolling of strip has been described. This model is developed based on the slab method of analysis and the hydrodynamic lubrication. The characteristics of rolling are obtained from the equations of equilibrium and the plate was allowed to strain harden assuming that the lubricant behaves as a Newtonian fluid. The shear stress to the plate is obtained b...

In this paper an analytical model for cold rolling of strip has been described. This model is developed based on the slab method of analysis and the hydrodynamic lubrication. The characteristics of rolling are obtained from the equations of equilibrium and the plate was allowed to strain harden assuming that the lubricant behaves as a Newtonian fluid. The shear stress to the plate is obtained b...

Formation of nano/ultrafine grain structure in AISI 304L austenitic stainless steel through the martensite reversion treatment was studied. The solution annealed specimens were cold rolled up to 95 % thickness reduction at -15°C. The cold-rolled specimens were subjected to reversion annealing treatment at the temperature range of 700-1000 °C for 10–150 min. Microstructural evolutions were analy...

Mathematical model of rolling process is used at cold mill rolling on tandem mills in metallurgy. The model goal is to analyse rolling process according to process data measured on the mill and get immeasurable variables necessary for rolling control and optimal mill pre-set for next rolled coil. The values obtained by model are used as references for superimposed technology controllers (thickn...