نتایج جستجو برای: colloidal quantum dot
تعداد نتایج: 325560 فیلتر نتایج به سال:
Dr. D. A. R. Barkhouse , Dr. R. Debnath , I. J. Kramer , D. Zhitomirsky , Dr. A. G. Pattantyus-Abraham , Dr. L. Levina , Prof. E. H. Sargent Department of Electrical and Computer Engineering University of Toronto 10 King’s College Road, Toronto, Ontario M5S 3G4, Canada E-mail: [email protected] Dr. D. A. R. Barkhouse IBM Thomas J. Watson Research Center Kitchawan Road, Yorktown Heights, N...
Low-threshold, gain switched colloidal quantum dot (CQD) distributed-feedback lasers operating in the nanosecond regime are reported and proposed for sensing applications for the first time to the authors' knowledge. The lasers are based on a mechanically-flexible polymeric, second order grating structure overcoated with a thin-film of CQD/PMMA composite. The threshold fluence of the resulting ...
Individual colloidal quantum dots can be optically trapped and manipulated by a single infrared laser beam operated at low laser powers. If the absorption spectrum and the emission wavelength of the trapping laser are appropriately chosen, the trapping laser light can act as a source for two-photon excitation of the trapped quantum dot. This eliminates the need for an additional excitation lase...
Colloidal quantum dot (CQD) films allow large-area solution processing and bandgap tuning through the quantum size effect. However, the high ratio of surface area to volume makes CQD films prone to high trap state densities if surfaces are imperfectly passivated, promoting recombination of charge carriers that is detrimental to device performance. Recent advances have replaced the long insulati...
We report the absorption cross-section of colloidal InAs quantum dots of mean radii from 1.6 to 3.45 nm. We find excellent agreement between the measured results and calculated values based on a model of small-particle light absorption. The absorption cross-section per dot is 6.2 x 10(-16)R(3) cm(2) at 2.76 eV and 3.15 x 10(-16)R(1.28) cm(2) at the first-exciton absorption peak, with the dot ra...
In this work, four-terminal (4T) tandem solar cells were fabricated by using a methylammonium lead iodide (MAPbI3) perovskite cell (PSC) as the front-cell and sulfide (PbS) colloidal quantum dot (CQDSC) back-cell.
سنسورهای مادون قرمز در بازه طول موجی 3 تا 5 میکرومتر، ادوات مهمی برای کاربردهای تصویربرداری پزشکی، دید در شب، تجهیزات آتش نشانی و کاربردهای دفاعی و امنیتی به حساب می آیند. نوع جدیدی از سنسورهای مادون قرمز، آشکارسازهای نوری بهمنی نقطه کوانتومی می باشند. یکی از پارامترهای اساسی در مدلسازی فیزیکی آشکارسازها، جریان نوری است. این کمیت مرتبط با میزان جذب در ناحیه جاذب و ضرب در ناحیه ضرب بهمنی می باشد...
Recently, the fabrication of CdSe nanoplatelets became an important research topic. Nanoplatelets are often described as having a similar electronic structure as two-dimensional quantum wells and are promoted as colloidal quantum wells with monolayer precision width. In this paper we show that nanoplatelets are not ideal quantum wells, but cover depending on the size: the strong confinement reg...
Quantum dots play a promising role in the development of novel optical and biosensing devices. In this study, we investigated steady state and time-dependent luminescence properties of InGaP/ZnS core/shell colloidal quantum dots in a solution phase at room temperature. The steady state experiments exhibited an emission maximum at 650 nm with full width at half maximum of ~ 85 nm, and strong fir...
In this paper, we investigate variation of the wavelength, intensity and polarization of the self-assembled InAs/GaAs quantum dots emission by microphotoluminescence spectroscopy at the liquid helium temperature. The microcavity wafer sample is grown by molecular beam epitaxy (MBE) and chemically etched into the micropillar structure (with elliptical cross section - long and short axis 2µm×1.5µ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید