This paper examines the effect of various combustion models when predicting the environment in a building arising from fire in a room. The use of a stoichiometric combustion model will usually over-predict the efficiency of the combustion process in the fuel-rich areas and hence over-predict the temperature field. A modified combustion model presented in this paper can improve the predicted res...

Two analytical procedures, dry combustion and acid extraction, were compared for the preparation of soft animal tissues and other biological samples for determination of fluoride with an ion selective electrode. Both methods were suitable for determining F in the range of 0.5 to 10.0 μg/g with less than 6% error. The combustion method is less laborious but is more accurate. The extraction metho...

The beneficiation of coal through gravity separation plays a key role in industry, allowing for particle size distribution determination and separation of coal in to various sizes for future combustion in boilers, and separation of impurities. For a complete combustion an industrial suspension boiler using bituminous coal requires an average particle size of 45μm and 80 to 85% of particles to b...

The most troublesome obstacle to the quantitative determination of the very minute quantities of iodine which are normally present in biological materials has been the destruction, without loss of iodine, of the relatively large amounts of organic matter present. The procedures which have been used to destroy the organic matter include fusion with alkali, combustion in a closed system, and dige...

Isotope ratio monitoring following on-line combustion is a new method in gas chromatography/mass spectrometry (GC/MS) that allows the ratios of abundances of stable isotopes of elements such as carbon and nitrogen to be determined for individual compounds introduced via a gas chromatograph. It is the first combustion method that allows direct measurement of isotope ratios of individual molecula...

Burning fuels in an O2/H2O atmosphere is regarded as the next generation of oxy-fuel combustion for CO2 capture and storage (CCS). By combining oxy-fuel combustion and biomass utilization technology, CO2 emissions could be further reduced. Therefore, this work focuses on investigating the combustion characteristics of single particles from bituminous coal (BC) and pine sawdust (PS) in O2/N2, O2...

Homogeneous Charge Compression Ignition (HCCI) combustion is a pioneer method of combustion in which pre-mixed fuel and oxidizer (typically air) are compressed to the point of auto-ignition. HCCI engines can operate with most alternative fuels, especially, dimethyl ether (DME) which has been tested as a possible diesel fuel due to its simultaneously low NOx and PM emissions. In this paper a ...

In this paper we describe a fast and interactive method for simulating and controlling the combustion process together with the decomposition of burning solids. The combustion and decomposition processes are integrated to create a physically-based model that runs at interactive rates.

znfe2o4 mixed spinel ferrite nanoparticles obtained through a citrate-nitrate combustion method. ignited products calcined at different temperatures in 600-900ºc range and effect of calcination treatment temperature investigated. final products characterized by x-ray diffraction (xrd), fourier-transform infrared spectroscopy (ftir), and field emission scanning electron microscopy (fesem). the a...

According to statistics, the coal spontaneous combustion fire accounted for more than 94% of the total number of coal mine fire, of which 60% occur in gob [1]. With the mining depth increasing, coal pillar become so easy to be crushed that coal spontaneous combustion is easier to occur. The fire’s occurrence and development not only affect the safety in production and the surrounding environmen...