A large amount of blast furnace slag is generated in China. Most ground granulated blast furnace slag (GGBS) however ends up in low-grade applications. Blast furnace slag, ground to an appropriate fineness, can be used as a partial replacement of cementitious material in concrete. The potential for using GGBS in structural concrete, e.g. concrete beams and columns is investigated at Xi’an Jiaot...

The purpose of this research to present for the first time a practical plan to cost optimize the composite metal floor deck, so that the designer, by having the dimensions of the main beam framing, will be able to come to the most design including: the section of composite steel beam, the beam span, the thickness of metal deck sheets and the thickness of the concrete slab. The main method of op...

A Paper for the World Wise Conference 1999 Winnipeg, Manitoba © November 15, 1999 Introduction Joints are used in concrete pavements in order to control cracking due to thermal and environmental conditions. Dowels span joints to transfer load from one slab to an adjacent slab and to provide vertical and horizontal alignment. Currently, smooth epoxy coated steel dowels are placed across transver...

A new generation of concrete highway bridges has recently been built in Canada using new design concepts and advanced materials for reinforcing and prestressing concrete . This paper describes briefly the design and construction of three bridges. The first smart concrete highway bridge (Centre Street, Beddington Bridge, Calgary, Alberta) is prestressed by carbon fiber reinforced plastic (CFRP) ...

Continuously reinforced concrete pavement (CRCP) performance depends primarily on early-age cracks that result from changes in temperature and drying shrinkage. This report presents the findings of a study of the early-age behavior of CRCP in response to temperature change using a three-dimensional finite element model. The nonlinear effects of the bond slip between concrete and steel and betwe...

Complex sensitivity analysis of stresses in a concrete slab of the real type of rigid pavement made from recycled materials is performed. The computational model of the pavement is designed as a spatial (3D) model, is based on a nonlinear variant of the finite element method that respects the structural nonlinearity, enables to model different arrangements of joints, and the entire model can be...

In order to study the basic mechanical property of the new honeycombed-core girderless floor in cast-in-place reinforced concrete, and similarities and differences of the structural performance compared with traditional floor, we carried out the destructive stage loading test on large-scale corner columns supported reinforced concrete honeycombed-core girderless floor. And the thesis conducted ...

Concrete bridge decks are prone to ice accumulation. The use of road salts and chemicals for deicing is cost effective but causes damage to concrete and corrosion of reinforcing steel in concrete bridge decks. This problem is a major concern to transportation officials and public works due to rapid degradation of existing concrete pavements and bridge decks. The use of insulation materials for ...

A methodology has been developed for characterising the mechanical behaviour of concrete, based on the damaged plasticity model, enriched with a user subroutine (V)USDFLD in order to capture better the ductility of the material under moderate confining pressures. The model has been applied in the context of the international benchmark IRIS_2012, organised by the OECD/NEA/CSNI Nuclear Energy Age...

Abstract The article studies the punching shear capacity of reinforced concrete slabs by simulation method. Based on Concrete Damage Plasticity (CDP) constitute model, model is established in Abaqus software. was verified comparison tests. parametric were implemented to investigate effect and steel strength resistance slab. slab also calculated formulas proposed available standards. Obtained re...