Submitted: Jul 2, 2013; Accepted: Aug 12, 2013; Published: Aug 29, 2013 Abstract: Concrete mix design involves determination of relative proportions of powder contained in the binder system, granular aggregates and water. The theory of particle packing (TPP) concepts can be used for rational proportioning of concrete mixtures analytically based on the measured properties of individual ingredien...

Abstract In order to improve the utilization rate of mortar powder in concrete, influence on workability, compressive strength, impermeability, and volume stability recycled concrete was studied by using control variable method. The results show that aggregate can workability mechanical properties containing appropriate amount powder. content is less than 5%, strength will gradually with increa...

Nowadays, more efforts towards sustainability are required from the concrete industry. Replacing traditional aggregates by recycled bottom ash (BA) from municipal solid waste incineration can contribute to this goal. Until now, only partial replacement has been considered to keep the concrete workability, strength and durability under control. In this research, the feasibility of a full aggrega...

Alkali Activated Slag Concrete (AASC) mixes are manufactured by activating ground granulated blast furnace slag (GGBFS) using sodium hydroxide and sodium silicate solutions. The aim of the present experimental research was to investigate the effect of increasing the dosages of sodium oxide (Na2O, in the range of 4 to 8%) and the activator modulus (Ms) (i.e. the SiO2/Na2O ratio, in the range of ...

Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...

Cement-based concrete is the most widely used building and construction material in the world. Although concrete itself is relatively durable when used under the mild environments, its intrinsic weak tensile strength greatly limits its application due to its porous structure. Traditional strategies to overcome this weakness of concrete include utilization of various reinforcing materials, such ...

Glass Fibre Reinforced Concrete is recent introduction in the field of concrete technology. The present day world is witnessing the construction of very challenging and difficult Civil Engineering Structures. Concrete being the most important and widely used material is called upon to possess very high strength and sufficient workability properties. Concrete the most widely used consrtuction ma...

compacted low strength material (clsm) made with material such as fly ash and recycled aggregates is used as filler at city infrastructure canals without compaction need. experimental small specimens and large canals were casted with this concrete and tested to give several results. test results of compression strengths on 12 different designs shows that this concrete with high workability and ...

In this study, waste tire powder and waste liquid crystal display (LCD) glass sand are used as recycled materials. With a fixed water to binder ratio (W/B = 0.4), the use of fly ash and slag as cementreplacement materials. waste tire powder and waste LCD glass sand, which passed the sieve screen size # 30(0.595 mm), were used to replace fine aggregates at 0%, 5% and 10% in producing lightweight...